कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Forged Hunting Axe (Hatchet)
Forge

द्वारा बनाया गया

Forge

11. अक्टूबर 2026NO
0
0
0
0
0

Forged Hunting Axe (Hatchet)

A small one-handed axe forged from a 7/8 × 2-inch bar of good tool steel, best made by two people; a 6¾-inch bar gives two heads. The eye, about 9/16 × 1½ inches, is punched at a yellow heat with an eye punch and opened with drifts, the blade drawn out to a 3-inch edge and the head cut to length. The axe is annealed in lime or ashes, ground and buffed, then hardened from the hardening heat in tepid water and tempered by two hot iron bars laid on either side at the centre: dark purple for the blade, blue for the head.
उन्नत
4–6 hours

निर्देश

1

Mark and punch the eye

Mark the stock with chisel and centre punch. At a yellow heat, punch the eye with the narrow edge of the punch toward the blade; lift the punch after each blow to check it runs straight and to let it cool; a little fine coal in the hole stops it sticking. Punch nearly through, then finish from the other side.

इस चरण के लिए सामग्री:

चपटी टूल स्टील छड़चपटी टूल स्टील छड़1 टुकड़ा

आवश्यक उपकरण:

केंद्र-छेदककेंद्र-छेदक
लोहार की भट्ठीलोहार की भट्ठी
निहाईनिहाई
गर्म छेदकगर्म छेदक
घनघन
लोहार की संड़सीलोहार की संड़सी
2

Drift and draw out

Drive in a tool-steel drift, hammer the bulges down to the bar's size and smooth with a flatter; take the drift out before each reheat. Use two drifts, the first 3/8 inch narrower. Draw out the blade, driving the drift back in as the eye stretches so no cold shut forms.

आवश्यक उपकरण:

छेद चौड़ा करने वाला टेपरछेद चौड़ा करने वाला टेपर
समतल करने का औज़ारसमतल करने का औज़ार
उठाकर गिराने वाला घनउठाकर गिराने वाला घन
3

Shape and trim

Shape the blade with a heavy hammer and flatter and form its edge. Cut the head from the bar, draw it to size, cut it to length, then trim the blade to shape.

आवश्यक उपकरण:

गढ़ाई का हथौड़ागढ़ाई का हथौड़ा
समतल करने का औज़ारसमतल करने का औज़ार
गर्म छेनीगर्म छेनी
4

Anneal and grind

Heat to a full red and anneal in lime or ashes. When cold, grind on an emery wheel and finish on a buffing wheel.

आवश्यक उपकरण:

लोहार की भट्ठीलोहार की भट्ठी
मेज़ी घिसाई यंत्रमेज़ी घिसाई यंत्र
5

Harden and temper

Heat very slowly to the hardening heat and cool in tepid water. Draw the temper with two hot iron bars laid on either side at the centre; when the blade is dark purple and the head blue, cool quickly in water.

आवश्यक उपकरण:

लोहार की भट्ठीलोहार की भट्ठी
पानी चढ़ाने की बाल्टीपानी चढ़ाने की बाल्टी
लोहार की संड़सीलोहार की संड़सी
6

Handle

Shave the handle stock to fit the eye tightly, drive the head on, saw a kerf in the handle's top and drive a glued hardwood wedge into it. Trim flush and oil the handle.

इस चरण के लिए सामग्री:

हत्थे के लिए कठोर लकड़ी का टुकड़ाहत्थे के लिए कठोर लकड़ी का टुकड़ा1 टुकड़ा
कठोर काठ का फन्नाकठोर काठ का फन्ना1 टुकड़ा
अलसी का तेलअलसी का तेल10 मिली

आवश्यक उपकरण:

दो मूठ वाला रंदादो मूठ वाला रंदा
दो व्यक्तियों की आड़ी आरीदो व्यक्तियों की आड़ी आरी
बेंच शिकंजाबेंच शिकंजा

सामग्री

4

आवश्यक उपकरण

16

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...