
Building a Langspil — The Icelandic Drone Zither
निर्देश
Melody and drone from one box
Melody and drone from one box
Cut the soundbox parts
Cut the soundbox parts
इस चरण के लिए सामग्री:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 टुकड़ाआवश्यक उपकरण:
HacksawGlue the box frame
Glue the box frame
इस चरण के लिए सामग्री:
PVA Wood Glue1 टुकड़ाFit the soundboard
Fit the soundboard
इस चरण के लिए सामग्री:
Dry Softwood Board1 टुकड़ा
PVA Wood Glue1 टुकड़ाCut a soundhole
Cut a soundhole
आवश्यक उपकरण:
Sloyd Carving KnifeDrill the peg holes
Drill the peg holes
आवश्यक उपकरण:
AwlFit the tuning pegs
Fit the tuning pegs
इस चरण के लिए सामग्री:
Tuning Pegs3 टुकड़ेCarve the nut and bridge
Carve the nut and bridge
आवश्यक उपकरण:
Sloyd Carving KnifeString it
String it
इस चरण के लिए सामग्री:
Steel Music Wire1 टुकड़ाSet the frets
Set the frets
इस चरण के लिए सामग्री:
Fret Wire1 टुकड़ाआवश्यक उपकरण:
Metal FileTune the drones
Tune the drones
Tune the melody string
Tune the melody string
Play it
Play it
Compendium — the drone zither
Compendium — the drone zither
सामग्री
6- प्लेसहोल्डर
- 2 टुकड़ेप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 3 टुकड़ेप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue - Instead of Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack), try:
CDX Softwood Plywood
Fire-Rated Plywood - Instead of Steel Music Wire 0.032", try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
Bezel Wire
संबंधित ब्लूप्रिंट
ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत
Related blueprints
Other builds that share materials, tools, or techniques with this one.






CC0 पब्लिक डोमेन
यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।
उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।