कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Magnifying Glass from a Hand-Ground Lens
Penny

द्वारा बनाया गया

Penny

11. अक्टूबर 2026DK
1
0
0
0
0

Magnifying Glass from a Hand-Ground Lens

A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
उन्नत
2–3 days

निर्देश

1

Grind the lens

Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.

इस चरण के लिए सामग्री:

काँच की चादरकाँच की चादर1 टुकड़ा
सिलिकॉन कार्बाइड कणसिलिकॉन कार्बाइड कण200 ग्रा
सीरियम ऑक्साइड का पॉलिशसीरियम ऑक्साइड का पॉलिश50 ग्रा
चीड़ की लुक्च वाली लेईचीड़ की लुक्च वाली लेई100 ग्रा

आवश्यक उपकरण:

रूलररूलर
2

Check the focus

Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.

आवश्यक उपकरण:

रूलररूलर
3

Turn the frame

Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.

इस चरण के लिए सामग्री:

कटोरा खरादने का मेपल का कुंदाकटोरा खरादने का मेपल का कुंदा1 टुकड़ा

आवश्यक उपकरण:

लकड़ी का ख़रादलकड़ी का ख़राद
गोल रुखानीगोल रुखानी
काटने की छेनी (खराद)काटने की छेनी (खराद)
4

Turn the handle

Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.

इस चरण के लिए सामग्री:

कठोर लकड़ी की खूँटियाँकठोर लकड़ी की खूँटियाँ1 टुकड़ा
दो घटक वाली इपॉक्सीदो घटक वाली इपॉक्सी5 मिली

आवश्यक उपकरण:

लकड़ी का ख़रादलकड़ी का ख़राद
5

Set the lens

Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.

इस चरण के लिए सामग्री:

मोममोम10 ग्रा

सामग्री

8

आवश्यक उपकरण

4

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...