कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Platinum Wire: Sponge Rammed, Baked, Forged and Drawn, Ure 1839
Youblob · CC0
Forge

द्वारा बनाया गया

Forge

14. अक्टूबर 2026NO
16
0
0
1
0

Platinum Wire: Sponge Rammed, Baked, Forged and Drawn, Ure 1839

No furnace of 1839 could melt platinum, so it was worked like a powder. Andrew Ure: pound the spongy metal, sift it, ram it hard into a cylinder, and bake it 36 hours in a kiln; pure platinum then forges into any shape. Forge a thin rod and draw it down through a drawplate to wire. The picture: our diagram of the five stages.
उन्नत
Three days

निर्देश

1

Pound and sift

Pound the platinum sponge in the mortar and pass it through a fine sieve.

इस चरण के लिए सामग्री:

प्लैटिनमप्लैटिनम10 ग्रा

आवश्यक उपकरण:

खरल और मूसलखरल और मूसल
महीन जाली की चलनीमहीन जाली की चलनी
तराजूतराजू
2

Ram it hard

Fill a short steel tube with the powder, put a close-fitting rod on top as a rammer and squeeze it in the vice as hard as you can, adding powder until the tube is packed. Push the pressed bar out.

आवश्यक उपकरण:

इस्पात की नली 12 मिमीइस्पात की नली 12 मिमी
लोहे की गोल छड़लोहे की गोल छड़
बेंच शिकंजाबेंच शिकंजा
3

Bake

Bake the bar 36 hours at the full heat of the kiln. It shrinks by a fifth or a sixth of its volume.

आवश्यक उपकरण:

उच्च ताप की भट्ठीउच्च ताप की भट्ठी
लोहार की संड़सीलोहार की संड़सी
चमड़े के काम के दस्तानेचमड़े के काम के दस्ताने
4

Forge a rod

Forge the bar on the anvil into a round rod, reheating it with the torch whenever it stiffens. File a point on one end.

आवश्यक उपकरण:

निहाईनिहाई
आड़े फन वाला हथौड़ाआड़े फन वाला हथौड़ा
लोहार की संड़सीलोहार की संड़सी
प्रोपेन टॉर्चप्रोपेन टॉर्च
रेती सेटरेती सेट
चमड़े के काम के दस्तानेचमड़े के काम के दस्ताने
सुरक्षा चश्मासुरक्षा चश्मा
5

Draw

Wax the rod, push the point through the first hole of the drawplate held in the vice, grip it with the draw tongs and pull through. Go down hole by hole, annealing it red with the torch every few draws, until the caliper reads the size you want.

आवश्यक उपकरण:

इस्पात की तारखींच पट्टीइस्पात की तारखींच पट्टी
बेंच शिकंजाबेंच शिकंजा
खींचने की संड़सीखींचने की संड़सी
मोममोम
प्रोपेन टॉर्चप्रोपेन टॉर्च
डिजिटल वर्नियर कैलिपर, 6 इंचडिजिटल वर्नियर कैलिपर, 6 इंच
चमड़े के काम के दस्तानेचमड़े के काम के दस्ताने
6

How much wire

Jupyter नोटबुक लोड हो रही है…

सामग्री

1
  • प्लेसहोल्डर

आवश्यक उपकरण

18

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...