कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Post-and-Float Butter-Working Churn: Floats Revolving Astride Fixed Posts
Fyler built one machine to churn the cream and then work the butter, which he called the "Butter-Working Churn."
Orsamus R. Fyler of Brattleboro, Vermont, received US 9,148, dated 27 July 1852, for a cylinder churn whose floats, fixed to a shaft turned by a crank, "go astride of C the posts which stand firmly in the periphery of the churn and have their place as near as practicable to the axis." The posts are "large in their middle portions ... and small at each end"; the floats are "broad at their ends ... and narrow at the portion near the shaft," leaving oval passages. The posts lift out through the door; a slide lengthens the crank for the stiffer butter.
This rung looks at the crank's leverage, then prints the floats and posts, builds the drum, and makes and works butter.
मध्यवर्ती
About 4 hours, plus printing
निर्देश
1
1
The longer crank
The longer crank
Jupyter नोटबुक लोड हो रही है…
2
2
Churning and working in one churn before it
Churning and working in one churn before it
The embedded blueprint presses the butter between rollers and the churn's side. Fyler works it by drawing the floats through it past fixed posts.
3
3
Read US 9,148
Read US 9,148
"This smallness of the posts at each extremity enables them to pass through the butter with less resistance; and this wideness of the floats near the periphery and narrowness near the shaft makes them more efficient in moving and agitating the cream; in carrying more air into the cream; in reclosing the holes which the posts have cut in the butter; and in forcing the butter to pass through nearer the axis when the purchase upon it is greater."
4
4
Print the parts
Print the parts
Print two floats with their oval windows and square hubs (/uploads/blueprints/post-and-float-butter-working-churn-float.stl), two spindle-shaped posts (/uploads/blueprints/post-and-float-butter-working-churn-post.stl) and the crank arm (/uploads/blueprints/post-and-float-butter-working-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
इस चरण के लिए सामग्री:
PETG फिलामेंट1 टुकड़ाआवश्यक उपकरण:
फिलामेंट वाला 3D प्रिंटर (FDM)5
5
The drum
The drum
Use a round food-grade container about 180 mm across, laid on its side on a pine stand, with a door cut in its upper side. Drill holes in its lower side under the axis, 80 mm apart, and matching holes in the door, so the posts stand across the drum just beside the axis; a stainless skewer through holes above the door holds them.
इस चरण के लिए सामग्री:
खाद्य-श्रेणी भंडारण पात्र1 टुकड़ा
चीड़ का पटरा1 टुकड़ा
मृदु इस्पात की छड़1 टुकड़ा
लकड़ी का पेच #8 × 1"1 टुकड़ाआवश्यक उपकरण:
कोपिंग आरी
तारहीन ड्रिल
ड्रिल बिट सेट
हस्त आरी6
6
Shaft, floats and crank
Shaft, floats and crank
Pass a 10 mm square hardwood shaft through the drum's ends and the two floats, set opposite each other so their windows pass the posts. Glue on the crank arm and a dowel handle; a second hole further out lengthens the crank for working the butter.
इस चरण के लिए सामग्री:
कठोर लकड़ी की खूँटियाँ1 टुकड़ा
लकड़ी की गोंद1 टुकड़ा
चमड़े की पट्टी1 टुकड़ाआवश्यक उपकरण:
हस्त आरी
रेगमाल7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the drum cut away to show the two spindle-shaped posts standing across it beside the axis, and the floats with oval windows going astride them, on the stand.
8
8
Churn, then work the butter
Churn, then work the butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres and close the door. Crank steadily; time until the butter comes. Draw off the buttermilk, add cold water and crank on with the long crank hole, so the floats draw the butter past the posts and work it, until the water runs clear. Work in a pinch of salt the same way and weigh the butter.
इस चरण के लिए सामग्री:
गाढ़ी मलाई1500 मिली
मोटा समुद्री नमक1 टुकड़ा
जल1 टुकड़ाआवश्यक उपकरण:
भीतर लगा रहने वाला प्रोब थर्मामीटर
स्टॉपवॉच
डिजिटल रसोई तराज़ू
स्टेनलेस इस्पात का बड़ा मिश्रण-कटोरा9
9
Floats that catch the posts, a door that lifts
Floats that catch the posts, a door that lifts
Post-and-float churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Orsamus R. Fyler** of Brattleboro, Windham County, Vermont, received US 9,148, dated 27 July 1852 (the drawing sheet reads "O. R. Fyler"). He claimed the combination of floats on a revolving axis with stationary posts near the axis, and of dashers broad at their ends with posts small at each end and large in their middle.
**Honest limits.** A food-grade container and printed parts stand in for his cylinder; the notebook's loads are illustrative, not measured. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
सामग्री
11- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1500 मिलीप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
आवश्यक उपकरण
10- प्लेसहोल्डर
- प्लेसहोल्डर
- 1 vendor sell this, none ship to you yetप्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
- प्लेसहोल्डर
डिज़ाइन फ़ाइलें
1यह ब्लूप्रिंट बनाता है
संबंधित ब्लूप्रिंट
ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत
Roller-and-Float Gathering Churn: Floats That Fold Onto Rollers to Press the Butter
Woody द्वारा
लकड़ी का काम
35
0
0
0
0
0
Revolving-Drum Toothed-Bar Churn: The Churn Turns Round a Fixed Toothed Bar
Karen द्वारा
खाद्य और पेय
19
0
0
0
0
0
Centrifugal Buttermilk-Extractor Churn: A Spinning Drum That Throws the Buttermilk Out
Martin द्वारा
खाद्य और पेय
17
0
0
0
0
0
CC0 पब्लिक डोमेन
यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।
उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।