कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Steel Rivets Forged in a Nail Header
Forge

द्वारा बनाया गया

Forge

14. अक्टूबर 2026NO
20
0
0
0
0

Steel Rivets Forged in a Nail Header

A rivet is a short rod with a head on one end; set through a hole, its tail is hammered into a second head, and it holds the parts together for good. Solid rivets go back to the Bronze Age. They are forged the way nails are, headed in a nail header, only the shank is cut off square instead of drawn to a point. The picture: riggers setting red-hot rivets on the Sydney Harbour Bridge, 1930–31 (Sam Hood).
मध्यवर्ती
An afternoon for a few dozen

निर्देश

1

Heat the rod end

Heat the end of a mild steel rod of the rivet's diameter in the forge to a bright orange.

इस चरण के लिए सामग्री:

मृदु इस्पात की छड़मृदु इस्पात की छड़1 m
लकड़ी का कोयलालकड़ी का कोयला1 as required

आवश्यक उपकरण:

लोहार की भट्ठीलोहार की भट्ठी
लोहार की संड़सीलोहार की संड़सी
वेल्डिंग के दस्तानेवेल्डिंग के दस्ताने
सुरक्षा चश्मासुरक्षा चश्मा
2

Nick at length

Nick the rod nearly through on the hot cut hardy at the rivet's length plus enough for the head (see the notebook).

आवश्यक उपकरण:

निहाईनिहाई
निहाई की काटने वाली छेनीनिहाई की काटने वाली छेनी
आड़े फन वाला हथौड़ाआड़े फन वाला हथौड़ा
वेल्डिंग के दस्तानेवेल्डिंग के दस्ताने
सुरक्षा चश्मासुरक्षा चश्मा
3

Head it

Drop the end into the nail header over the anvil's pritchel hole, with the head stock standing proud, and spread it with three to five quick blows, as for a nail head. Snap it free at the nick.

आवश्यक उपकरण:

कील का सिर बनाने की पट्टीकील का सिर बनाने की पट्टी
निहाईनिहाई
आड़े फन वाला हथौड़ाआड़े फन वाला हथौड़ा
वेल्डिंग के दस्तानेवेल्डिंग के दस्ताने
सुरक्षा चश्मासुरक्षा चश्मा
4

Cool and check

Let the rivets cool (do not harden them: the tail must spread cold or hot when set). Check the shank with a caliper; file off any burr so it slips into its hole.

आवश्यक उपकरण:

पानी चढ़ाने की बाल्टीपानी चढ़ाने की बाल्टी
डिजिटल वर्नियर कैलिपर, 6 इंचडिजिटल वर्नियर कैलिपर, 6 इंच
5

Rod for each rivet

Jupyter नोटबुक लोड हो रही है…

सामग्री

2

आवश्यक उपकरण

10

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...