कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य

Stopwatch: Lugrin, 1876
Henri Alfred Lugrin of New York patented this timing watch in 1876, US 176,231. Instead of placing the timing hand on the face, where it needs more gearing, he put the timing hand and its own dial on top of the watch movement. The hand is geared to the watch's second wheel through a pinion and wheel, and sits on its post by a tube and friction spring, so it can be stopped while the watch runs on. A heart-shaped cam and lever return it to the start, and the same lever also returns a minute hand on a small sectional dial beside it. A stop lever holds the timing hand. Lugrin's hand moves in fifths of a second but he calls it the quarter-second hand.
उन्नत
Watchmaker's work
निर्देश
1
1
Timing hand and dial
Timing hand and dial
Mount the timing hand and its dial on top of the watch movement, the hand on a short centre post.
इस चरण के लिए सामग्री:
घड़ी का तंत्र1 टुकड़ा
समय-मापन सुई और डायल1 टुकड़ाआवश्यक उपकरण:
परिशुद्ध चिमटी सेट
पेचकस सेट2
2
Gear it to the movement
Gear it to the movement
Gear the post to the second wheel of the watch train through a pinion and wheel.
इस चरण के लिए सामग्री:
समय-मापन गियर का पिनियन और पहिया1 टुकड़ाआवश्यक उपकरण:
परिशुद्ध चिमटी सेट
पेचकस सेट3
3
Friction connection
Friction connection
Connect the hand to its post by a tube and friction spring, so the hand can be stopped without stopping the movement.
इस चरण के लिए सामग्री:
घर्षण स्प्रिंग और नली1 टुकड़ाआवश्यक उपकरण:
परिशुद्ध चिमटी सेट4
4
Minute recorder
Minute recorder
Place the minute hand and its sectional dial at one side of the timing hand, on a post geared with the barrel wheel, connected by the same kind of tube and friction spring.
इस चरण के लिए सामग्री:
मिनट गणक सुई और डायल1 टुकड़ाआवश्यक उपकरण:
परिशुद्ध चिमटी सेट
पेचकस सेट5
5
Return and stop
Return and stop
Fit the heart-shaped cams and the return lever, extended so one lever returns both hands to the start at once, and fit the stop lever.
इस चरण के लिए सामग्री:
हृदय कैम और वापसी लीवर1 टुकड़ा
रोक लीवर1 टुकड़ाआवश्यक उपकरण:
परिशुद्ध चिमटी सेट
पेचकस सेटसामग्री
7- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
यह ब्लूप्रिंट बनाता है
संबंधित ब्लूप्रिंट
ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत
CC0 पब्लिक डोमेन
यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।
उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

