सहयोग
कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Water-Cooled Copper Mould: Two Halves with Cast-In Pipes, in a Trunnion Yoke (Peirce, US 2,048,024, 1936)
Forge

द्वारा बनाया गया

Forge

3. नवंबर 2026NO
9
0
0
0
0

Water-Cooled Copper Mould: Two Halves with Cast-In Pipes, in a Trunnion Yoke (Peirce, US 2,048,024, 1936)

A mould for metals that conduct heat well: two thick copper blocks, each cast round a grid of copper pipes that carry cooling water. They are bolted face to face, so the cavity can be machined accurately, and carried in a steel yoke on hollow trunnions that feed the water. A latched gate closes the bottom. The casting can be dumped out of the top by turning the yoke, or out of the bottom by opening the gate. Result: a water-cooled copper mould that freezes the metal fast and can be taken apart, machined and cleaned. Source: W. H. Peirce (American Smelting and Refining), US 2,048,024 (1936). Unknown: sizes and the copper grade. Picture: the patent drawing.
उन्नत
Unknown

निर्देश

1

Cast the two halves round their pipes

For each half, assemble copper pipes into a grid: a horizontal inlet pipe at the bottom, an outlet pipe at the top, and several vertical pipes joining them. Any steam formed in casting then rises to the outlet. Cast a block of copper of about the mould's shape over the grid. Ours: copper ingot melted in a crucible furnace. Not given: sizes, the copper grade.

इस चरण के लिए सामग्री:

ताँबे की नलीताँबे की नली1 cooling-pipe grids
तांबे की सिल्लीतांबे की सिल्ली1 mould blocks

आवश्यक उपकरण:

घरिया भट्ठीघरिया भट्ठी
अज्ञात मापअज्ञात माप
2

Machine the cavity

Machine the inner faces of the two halves to form the casting space, accurately. The recesses can be cut to different depths, for example five-eighths of the casting's width in one half and three-eighths in the other. Bolt the halves together face to face.

इस चरण के लिए सामग्री:

अज्ञात धातुअज्ञात धातु1 bolts

आवश्यक उपकरण:

मिलिंग मशीनमिलिंग मशीन
ड्रिल मशीन (खंभेदार)ड्रिल मशीन (खंभेदार)
चूड़ी काटने का सेटचूड़ी काटने का सेट
3

Make the yoke and the bottom gate

Cast a U-shaped steel yoke in one piece: two hollow ends with trunnions in line, joined by struts that carry the mould, bolted on. Make a bottom gate machined to fit tight under the mould, with its own cooling passage. Mount it on a gate arm keyed to a shaft across the yoke, its wedge end pinned in a V slot so the gate rocks to align. Add a lever on the shaft and a latch on an eccentric with a handle, to lock the gate up tight. Ours: steel ingot for the yoke casting.

इस चरण के लिए सामग्री:

इस्पात की सिल्लीइस्पात की सिल्ली1 yoke casting
अज्ञात धातुअज्ञात धातु1 gate, arm, shaft, lever, latch

आवश्यक उपकरण:

घरिया भट्ठीघरिया भट्ठी
मिलिंग मशीनमिलिंग मशीन
4

Pipe the cooling water

Bring water in through a pipe in the centre of one trunnion into the hollow yoke end, and from there by fitted pipes to the inlets of both halves and by a flexible metal hose to the gate. Lead the outlets to the other hollow end, and out through a pipe in the centre of the other trunnion, so the water keeps flowing while the yoke turns. Not given: the hose, the flow.

इस चरण के लिए सामग्री:

ताँबे की नलीताँबे की नली1 inlet and outlet pipes
अज्ञात सामग्रीअज्ञात सामग्री1 metallic hoses

आवश्यक उपकरण:

जलजल
5

Cast and dump a cake

Latch the gate shut, coat the cavity with a mould dressing such as graphite, circulate the water and fill the mould with molten metal. When the cake has cooled, turn the yoke on its trunnions so it slides out of the top, or trip the latch so the gate swings back and it drops out of the bottom. Unbolt the halves now and then to clean them or machine their faces true again.

आवश्यक उपकरण:

ग्रेफ़ाइट चूर्णग्रेफ़ाइट चूर्ण
जलजल

सामग्री

5

आवश्यक उपकरण

7

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...