कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Wooden Ruler, Graduated with a Caliper
Woody

द्वारा बनाया गया

Woody

11. अक्टूबर 2026NO
4
0
0
0
0

Wooden Ruler, Graduated with a Caliper

A ruler is only as good as its marks. Here every mark is measured from the ruler's own end with a digital caliper, so errors do not add up as they would by stepping off one centimetre after another. A 150 mm caliper marks the first half; the second half is measured from the far end. Straight-grained hardwood stays straight.
शुरुआती
2 hours

निर्देश

1

Plane the blank

Plane a straight-grained hardwood strip to about 310 x 30 x 5 mm, with one long edge dead straight and the ends square.

इस चरण के लिए सामग्री:

कठोर काठ की पट्टीकठोर काठ की पट्टी1 टुकड़ा

आवश्यक उपकरण:

ब्लॉक रंदाब्लॉक रंदा
सीधा किनारासीधा किनारा
स्थिर गुनियास्थिर गुनिया
बेंच शिकंजाबेंच शिकंजा
2

Mark from the left end

Set the caliper to each length from 0 to 150 mm and, with its fixed jaw on the ruler's left end, nick the edge at the moving jaw with the marking knife.

आवश्यक उपकरण:

डिजिटल वर्नियर कैलिपर, 6 इंचडिजिटल वर्नियर कैलिपर, 6 इंच
निशान लगाने का चाकूनिशान लगाने का चाकू
3

Mark from the right end

Cut the blank to exactly 300 mm, then mark 150 to 300 by measuring from the right end in the same way.

आवश्यक उपकरण:

डिजिटल वर्नियर कैलिपर, 6 इंचडिजिटल वर्नियर कैलिपर, 6 इंच
निशान लगाने का चाकूनिशान लगाने का चाकू
स्थिर गुनियास्थिर गुनिया
4

Knife the lines

Square each nick across with the try square and knife: short lines for mm, medium for 5, long for 10.

आवश्यक उपकरण:

स्थिर गुनियास्थिर गुनिया
निशान लगाने का चाकूनिशान लगाने का चाकू
5

Finish

Sand lightly and wipe on linseed oil; the oil darkens the knife lines so they read clearly.

इस चरण के लिए सामग्री:

अलसी का तेलअलसी का तेल10 मिली

आवश्यक उपकरण:

रेगमाल की शीटरेगमाल की शीट
6

Check it

Measure across several marks with the caliper; note the largest error on the back.

आवश्यक उपकरण:

डिजिटल वर्नियर कैलिपर, 6 इंचडिजिटल वर्नियर कैलिपर, 6 इंच

सामग्री

2

आवश्यक उपकरण

7

यह ब्लूप्रिंट बनाता है

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...