कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Metal Oxide Varistor: Zinc Oxide with 0.5 % Antimony Trioxide, Bismuth-Manganese Oxide Paste Fired On (Masuyama 1972, Ex. 7)
Ed

द्वारा बनाया गया

Ed

28. अक्टूबर 2026FI
2
0
0
0
0

Metal Oxide Varistor: Zinc Oxide with 0.5 % Antimony Trioxide, Bismuth-Manganese Oxide Paste Fired On (Masuyama 1972, Ex. 7)

A varistor whose bismuth oxide and manganese dioxide are both fired on from a paste: 99.5 % zinc oxide with 0.5 % antimony trioxide by moles, sintered at 1350 °C, coated with a 70 : 30 bismuth oxide and manganese dioxide paste and fired at 800 °C. The disc measured a C-value of 140 at 1 mA and a nonlinearity exponent n of 40.8. Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 7. Unknown: what the silver paint is, and how strong the epoxy solution of the paste is. The spraying is ours, after US Army Corps of Engineers EM 1110-2-3401 (1999). The 10 g batch is our arithmetic. Picture: the patent's drawing.
उन्नत
2 days

निर्देश

1

Weigh 99.5 : 0.5 and wet-mill 5 hours

Mix zinc oxide and antimony trioxide 99.5 : 0.5 by moles. Ours, for 10 g: 9.823 g zinc oxide, 0.177 g antimony trioxide (our arithmetic). Mill wet for 5 hours, then dry, as in Example 1. Unknown: the milling liquid.

इस चरण के लिए सामग्री:

ज़िंक ऑक्साइड चूर्णज़िंक ऑक्साइड चूर्ण9.823 ग्रा
एंटिमनी ट्राइऑक्साइडएंटिमनी ट्राइऑक्साइड0.177 ग्रा

आवश्यक उपकरण:

तराजूतराजू
लोहे की बॉल मिललोहे की बॉल मिल
सुखाने की भट्ठीसुखाने की भट्ठी
2

Press discs 13 mm by 2.5 mm

Press discs 13 mm across and 2.5 mm thick at 340 kg/cm², as in Example 1.

आवश्यक उपकरण:

हाइड्रोलिक प्रेसहाइड्रोलिक प्रेस
डिस्क दबाने की डाईडिस्क दबाने की डाई
वर्नियर कैलिपरवर्नियर कैलिपर
3

Sinter 1 hour at 1350 °C and furnace-cool

Sinter in air at 1350 °C for 1 hour and let the discs cool in the furnace.

आवश्यक उपकरण:

मफल भट्ठीमफल भट्ठी
4

Lap both faces

Lap both faces with silicon carbide abrasive. Example 7 gives no thickness.

आवश्यक उपकरण:

सिलिकॉन कार्बाइड कणसिलिकॉन कार्बाइड कण
वर्नियर कैलिपरवर्नियर कैलिपर
5

Coat with bismuth and manganese oxide paste, fire at 800 °C

Coat both lapped faces with a paste whose solids are 70 % bismuth oxide and 30 % manganese dioxide by weight, and fire it in air at 800 °C for 30 minutes. Example 7 does not name the paste's liquid; ours: the epoxy-resin butyl-alcohol solution of Example 4. Not given: how much paste.

इस चरण के लिए सामग्री:

बिस्मथ ऑक्साइडबिस्मथ ऑक्साइड1 as required
मैंगनीज़ डाइऑक्साइड (पाइरोलुसाइट)मैंगनीज़ डाइऑक्साइड (पाइरोलुसाइट)1 as required

आवश्यक उपकरण:

इपॉक्सी रालइपॉक्सी राल
n-ब्यूटेनॉलn-ब्यूटेनॉल
मफल भट्ठीमफल भट्ठी
6

Spray aluminium electrodes and attach leads

Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint, as in Example 1. Ours, after US Army Corps of Engineers EM 1110-2-3401 (1999): wire-arc spray the aluminium from two 3.2 mm wires melted by an 18-40 V DC arc and atomised by compressed air, 15-20 cm from the disc and never at less than 45°, in at least two coats at right angles of 50-75 µm each. Unknown: the paint.

इस चरण के लिए सामग्री:

ऐलुमिनियम की सिल्लीऐलुमिनियम की सिल्ली1 as 3.2 mm spray wire
चाँदी की चालक पेंटचाँदी की चालक पेंट1 as required
ताँबे का तारताँबे का तार2 टुकड़े

आवश्यक उपकरण:

वर्नियर कैलिपरवर्नियर कैलिपर
वायर-आर्क स्प्रे गनवायर-आर्क स्प्रे गन
औद्योगिक वायु संपीडकऔद्योगिक वायु संपीडक

सामग्री

7

आवश्यक उपकरण

12

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...