همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
120-Mesh Sieve: U.S. Standard Sieve No. 120 (Bureau of Standards, 1924)
Tex

ایجاد شده توسط

Tex

3. نوامبر 2026FO
۱۰
۰
۰
۱
۰

120-Mesh Sieve: U.S. Standard Sieve No. 120 (Bureau of Standards, 1924)

The standard testing sieve No. 120: plain-woven brass or bronze wire cloth with 0.125 mm (0.0049 in) openings and 0.086 mm (0.0034 in) wire, soldered smoothly into a round frame about 20 cm (8 in) across. Result: a sieve that passes grains under 0.125 mm and holds back larger ones, made to the Bureau of Standards tolerances. Source: Bureau of Standards, Letter Circular 74, Standard Specifications for Sieves (revised 1924). Unknown: the frame metal and the weaving. Picture: the Bureau's table.
متوسط
Unknown

دستورالعمل‌ها

1

Weave the wire cloth

Weave plain (not twilled) cloth from brass, bronze or other suitable wire 0.086 mm (0.0034 in) thick, so the openings between adjacent wires are 0.125 mm (0.0049 in) each way, about 120 wires to the inch. Ours: bronze wire. Not given: how it is woven.

مواد مورد نیاز این مرحله:

مفتول برنزمفتول برنز1 warp and shoot wires

ابزارهای مورد نیاز:

دستگاه بافت توری سیمیدستگاه بافت توری سیمی
2

Make the frame

Make a circular frame about 20 cm (8 in) across, with about 5 cm (2 in), or 2.5 cm (1 in), between its top and the cloth. Ours: brass strip. Not given: the frame metal.

مواد مورد نیاز این مرحله:

نوار برنجینوار برنجی1 frame

ابزارهای مورد نیاز:

قیچی ورق‌بریقیچی ورق‌بری
هویههویه
3

Mount the cloth

Mount the cloth on the frame without distorting it. Fill the joint between cloth and frame smoothly with solder, so the material being sieved cannot catch in it.

مواد مورد نیاز این مرحله:

لحیم قلع-سربلحیم قلع-سرب1 joint
فلاکس لحیمفلاکس لحیم1 joint

ابزارهای مورد نیاز:

هویههویه
4

Check it against the tolerances

Measure the warp and shoot wires separately. Their average opening must be 0.125 mm within ±6 %, their average diameter 0.086 mm within −15 to +35 %, and no opening may exceed 0.125 mm by more than 40 %. Reject a sieve with punctures, loose or wavy cloth, poor soldering, or too many large openings.

ابزارهای مورد نیاز:

میکرومترمیکرومتر
ذره‌بینذره‌بین

مواد

4
  • 1 warp and shoot wires
    جایگزین
  • جایگزین
  • جایگزین
  • جایگزین

ابزارهای لازم

5
  • جایگزین
  • جایگزین
  • 2 vendors sell this, none ship to you yet
    جایگزین
  • جایگزین
  • جایگزین

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...