هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Acrylic Block: Methyl Methacrylate Syrup Cast in Layers between Glass
Charlie

ایجاد شده توسط

Charlie

20. اکتبر 2026DE
۶
۰
۰
۰
۰

Acrylic Block: Methyl Methacrylate Syrup Cast in Layers between Glass

A thick acrylic block cannot be cast flawless in one pour. Tattersall (ICI, US 2,071,907, 1937) built it up in layers: pour 1/2 inch of syrup on a level glass plate, let it set for a day at room temperature, pour the next 1/2 inch on top, cover with a second glass plate, wait another day, then heat the sandwich at 80 °C. Each 1/2 inch layer shrinks to about 1/3 inch. The glass gives both faces a finished polish with no grinding. The picture: our diagram.
متوسط
3 days

دستورالعمل‌ها

1

Level the bottom plate

Set a glass plate on a ledge in a wooden frame, on a body of plaster of Paris, and level it carefully. The example sheet was 10 by 18 inches.

ابزارهای مورد نیاز:

شیشهٔ پنجرهشیشهٔ پنجره
قاب چوبیقاب چوبی
گچ پاریسگچ پاریس
تراز ۱٫۵ متریتراز ۱٫۵ متری
2

Pour the first 1/2 inch

Pour room-temperature syrup 1/2 inch deep (about 1.5 litres for 10 by 18 inches; our figure). Cover against dust, but do not put the top plate on yet. Leave 24 hours at about 20 °C.

مواد مورد نیاز این مرحله:

شربت متیل متاکریلاتشربت متیل متاکریلات3 l

ابزارهای مورد نیاز:

دستکش لاستیکیدستکش لاستیکی
دماسنج آزمایشگاهیدماسنج آزمایشگاهی
3

Pour the next layer and cover

Pour a second 1/2 inch layer on the first. Lower the top glass plate onto it so it rests on the syrup and keeps pressing on it. Leave another 24 hours at about 20 °C. For a thicker block repeat the layers, a day apart, and put the plate on the last one.

ابزارهای مورد نیاز:

شیشهٔ پنجرهشیشهٔ پنجره
4

Heat at 80 °C

Take the glass sandwich out of the frame and heat it for three hours at 80 °C to finish the polymerisation.

ابزارهای مورد نیاز:

کورهٔ خشک‌کردنکورهٔ خشک‌کردن
دماسنج آزمایشگاهیدماسنج آزمایشگاهی
دستکش گرمااستواردستکش گرمااستوار
5

Spring off the glass

Spring the glass plates off the block with a knife blade. Both faces come out smooth and polished.

ابزارهای مورد نیاز:

چاقوی کاردستیچاقوی کاردستی
دستکش لاستیکیدستکش لاستیکی

مواد

1

ابزارهای لازم

9

این نقشه می‌سازد

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...