همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)
Alundum, the artificial corundum made at Niagara Falls by the Norton Company: bauxite, calcined to drive off its water, is fused in an electric arc furnace with about 5 per cent carbon, which reduces its iron, silicon and titanium to metal nodules; the fused alumina cools slowly into a hard crystalline mass that is crushed and sized as abrasive grit.
Bauxite melts near 2,000 °C and could not be melted commercially without the electric furnace.
Source: A. Stansfield, The Electric Furnace, 2nd ed. (1914), pp. 357-358. Picture: the book's Fig. 143, the Higgins alundum furnace.
پیشرفته
Unknown
دستورالعملها
1
1
Calcine the bauxite
Calcine the bauxite
Calcine the bauxite in a rotary kiln to drive off its combined water.
مواد مورد نیاز این مرحله:
بوکسیت1 قطعهابزارهای مورد نیاز:
کورهٔ دوار2
2
Fuse in the arc furnace
Fuse in the arc furnace
Strike arcs between the electrodes and the carbon lining of the furnace bottom, then feed the calcined bauxite, with about 5 per cent carbon, in round the arcs; it melts and in time carries the current between the two arcs. Lower the water-cooled shell as the fused alundum builds up; the lower part solidifies as it fills.
مواد مورد نیاز این مرحله:
کربن1 about 5 per centابزارهای مورد نیاز:
کورهٔ قوس الکتریکی3
3
Cool slowly
Cool slowly
When the shell is full, lift it with its contents off the base, put another shell in place, and let the alundum cool slowly so it grows into a hard, tough crystalline mass.
ابزارهای مورد نیاز:
کورهٔ قوس الکتریکی4
4
Crush, separate and size
Crush, separate and size
Break up and crush the mass, separate the nodules of reduced metal mechanically, and size the grains for use as an abrasive.
ابزارهای مورد نیاز:
سنگشکن
مجموعهٔ الک (چشمهٔ پلکانی)ابزارهای لازم
4- جایگزین
- جایگزین
- جایگزین
- جایگزین
این نقشه میسازد
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.
