هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Barium Ferrite Disc Magnet: Barium Carbonate and Iron Oxide Sintered (Went, Philips 1956)
Charlie

ایجاد شده توسط

Charlie

28. اکتبر 2026DE
۱
۰
۰
۰
۰

Barium Ferrite Disc Magnet: Barium Carbonate and Iron Oxide Sintered (Went, Philips 1956)

The dark grey ceramic magnet on fridges and in loudspeakers is barium ferrite. It is made from two cheap powders: one part barium carbonate to six of iron oxide, milled, fired, milled again, pressed and sintered. No cobalt or nickel is needed. This is Example 34 of the Philips patent. Fired 4 hours at 1100 °C, its rod held 1,375 gauss with a coercive force of 3,350 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956). They pressed rods; the claim covers "a body of a desired shape", and the disc size is ours. The patent does not say how to magnetise it; our way is stated. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
پیشرفته
2 days

دستورالعمل‌ها

1

Weigh one part barium carbonate to six of iron oxide

Weigh 39.5 g of barium carbonate (0.2 mol) and 191.7 g of ferric oxide, Fe2O3 (1.2 mol). Barium carbonate is poisonous if swallowed: ours, gloves and a dust respirator.

مواد مورد نیاز این مرحله:

کربنات باریم (ویتریت)کربنات باریم (ویتریت)39.5 گرم
اکسید فریکاکسید فریک191.7 گرم

ابزارهای مورد نیاز:

ترازوی دو کفهترازوی دو کفه
دستکش لاستیکیدستکش لاستیکی
ماسک تنفسی P100ماسک تنفسی P100
2

Mill with ethanol for 4 hours

Grind the mixture with ethanol in an iron ball mill for 4 hours. Let the ethanol evaporate, then dry the powder in a drying oven.

ابزارهای مورد نیاز:

آسیاب گلوله‌ای آهنیآسیاب گلوله‌ای آهنی
اتانول - درجهٔ آزمایشگاهی، 95 %اتانول - درجهٔ آزمایشگاهی، 95 %
کورهٔ خشک‌کردنکورهٔ خشک‌کردن
3

Presinter at 1000 °C for 4 hours

Fire the dry powder in air at 1000 °C for 4 hours (ours: in a lidded porcelain crucible in a muffle furnace). Let it cool.

ابزارهای مورد نیاز:

کوره مافلکوره مافل
بوته با درپوش (چینی)بوته با درپوش (چینی)
انبر بوتهانبر بوته
دستکش گرمااستواردستکش گرمااستوار
4

Mill again for 4 hours

Grind the presintered product with ethanol in the ball mill for another 4 hours. Let the ethanol evaporate.

ابزارهای مورد نیاز:

آسیاب گلوله‌ای آهنیآسیاب گلوله‌ای آهنی
اتانول - درجهٔ آزمایشگاهی، 95 %اتانول - درجهٔ آزمایشگاهی، 95 %
کورهٔ خشک‌کردنکورهٔ خشک‌کردن
ماسک تنفسی P100ماسک تنفسی P100
5

Press discs at 1.5 tons per cm²

Press the powder at 1.5 tons/cm². The patent pressed rods; we press discs. Ours: a die 20 mm across, so about 4.7 tonnes on the punch (our arithmetic: 1.5 × 3.14 cm²).

ابزارهای مورد نیاز:

پرس هیدرولیکپرس هیدرولیک
قالب پرس دیسکقالب پرس دیسک
6

Sinter for 4 hours

Sinter the discs for 4 hours in oxygen or in air. The patent's results: at 1100 °C, 1,375 gauss and 3,350 oersted; at 1200 °C, 1,400 and 3,100; at 1300 °C, 1,850 and 1,780. Hotter gives a stronger but less stubborn magnet.

ابزارهای مورد نیاز:

کوره مافلکوره مافل
انبر بوتهانبر بوته
دستکش گرمااستواردستکش گرمااستوار
7

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

ابزارهای مورد نیاز:

آهن‌ربای برقیآهن‌ربای برقی
قطب‌نماقطب‌نما

مواد

2

ابزارهای لازم

14

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...