همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)
Woody

ایجاد شده توسط

Woody

13. نوامبر 2026NO
۶
۰
۰
۰
۰

Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)

H. J. Blacklidge's bobsled from The Boy Mechanic, Book 2 (1915): "any boy who can drive a nail and bore a hole can have a bobsled on short notice." Four barrel staves make the runners of two short bobs under a 4 ft board; the front bob turns on a centre bolt and is steered by a rope.
مبتدی
About 3 hours

دستورالعمل‌ها

1

His list in centimetres

در حال بارگذاری دفترچهٔ Jupyter…
2

Read The Boy Mechanic, Book 2

The materials: four good, solid barrel staves; four blocks 4 in long, 4 in wide and 2 in thick; two pieces 12 in long, 4 in wide and 1 in thick; one piece 12 in long, 2 in wide and 1-3/4 in thick; and a good board 4 ft long, 12 in wide and 1 in thick.
3

Make the two bobs

Make each crosspiece-and-knee unit from one 12 x 4 x 1 in piece and two of the blocks, as in his figure, and nail a barrel stave to each side for runners.

مواد مورد نیاز این مرحله:

تختهٔ بشکهتختهٔ بشکه4 قطعه
تختهٔ کاجتختهٔ کاج1 قطعه
تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
میخمیخ1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
چکشچکش
مدادمداد
متر نواریمتر نواری
4

Fit the bobs to the board

Fasten one bob to one end of the board. Attach the other at the centre of its crosspiece with a bolt, so it can turn. Fasten the 1-3/4 by 2 in piece, 12 in long, across the top of the board at the front end.

مواد مورد نیاز این مرحله:

تختهٔ کاجتختهٔ کاج1 قطعه
تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
پیچ سرگرد گردن‌چهارگوشپیچ سرگرد گردن‌چهارگوش1 قطعه
واشر تختواشر تخت2 قطعه
میخمیخ1 قطعه

ابزارهای مورد نیاز:

دریل دستهٔ گردان با متهدریل دستهٔ گردان با مته
ارهٔ دستیارهٔ دستی
چکشچکش
5

Fit the steering rope

Fasten a rope to the knees of the front runners; it steers the sled.

مواد مورد نیاز این مرحله:

طناب پنبه‌ایطناب پنبه‌ای1 قطعه

ابزارهای مورد نیاز:

دریل دستهٔ گردان با متهدریل دستهٔ گردان با مته
6

Troubleshooting

Bobsled troubleshooting.

Flow

Loading...
7

History and honest limits

From "An Inexpensive Bobsled" by H. J. Blacklidge, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 49). Which end of the board gets the bolted bob, the bolt size and the stave length come only from his figure or are not given. The tools and metric figures are ours.

مواد

7

ابزارهای لازم

5
  • جایگزین
  • جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • جایگزین

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...