همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)
Tex

ایجاد شده توسط

Tex

13. نوامبر 2026FO
۵
۰
۰
۰
۰

Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)

Robert Pound of Lavina, Montana, sent this cartridge belt to The Boy Mechanic, Book 2 (1915): a leather belt about 2-1/2 in wide with a 1 in strip woven through pairs of slits to form a row of loops. Using the strip's free end in the buckle lets the loops be tightened for different sizes.
مبتدی
About 2 hours

دستورالعمل‌ها

1

His sizes, and how many loops

در حال بارگذاری دفترچهٔ Jupyter…
2

Read The Boy Mechanic, Book 2

"Procure a leather belt, about 2-1/2 in. wide and long enough to reach about the waist, also a piece of leather, 1 in. wide and twice as long as the belt."
3

Cut the belt and strip

Cut a leather belt about 2-1/2 in wide and long enough to go round the waist, and a strip 1 in wide and twice as long as the belt. Fix a buckle to one end of the belt and rivet one end of the strip to the belt near the buckle.

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق2 قطعه
سگک آهنی زبانه‌دارسگک آهنی زبانه‌دار1 قطعه
پرچ مسیپرچ مسی1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
منگنهٔ سوراخ‌کن چرممنگنهٔ سوراخ‌کن چرم
چکشچکش
متر نواریمتر نواری
4

Weave the loops

Cut two slits in the belt, a cartridge's diameter apart. Pass the strip through one slit and back through the other to make a loop. About 1/4 in further on, cut two more slits and form the next loop the same way, and so on along the whole belt.

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
متر نواریمتر نواری
مدادمداد
5

Finish the end

Rivet the end of the strip to the belt, or take it into the buckle: then the strip can be drawn up to fit cartridges of different sizes. Punch the holes for the buckle tongue.

مواد مورد نیاز این مرحله:

پرچ مسیپرچ مسی1 قطعه

ابزارهای مورد نیاز:

منگنهٔ سوراخ‌کن چرممنگنهٔ سوراخ‌کن چرم
چکشچکش
6

Troubleshooting

Cartridge belt troubleshooting.

Flow

Loading...
7

History and honest limits

From "How to Make a Cartridge Belt" by Robert Pound, Lavina, Mont., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 55). He gives no slit length and no cartridge size; the slit spacing follows whatever cartridge the belt is for. The tools and metric figures are ours.

مواد

3

ابزارهای لازم

5
  • جایگزین
  • جایگزین
  • جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...