همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)
Woody

ایجاد شده توسط

Woody

13. نوامبر 2026NO
۶
۰
۰
۰
۰

Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)

A shoe rack "that can be placed on the wall in the clothes closet", from The Boy Mechanic (1913): two boards 9 in wide and about 3 ft long, held apart by six wedge-shaped partitions so the pockets open wider at the top, and a slatted bottom that lets the dirt fall through. Sizes are the book's. Contributed to Popular Mechanics by Guy H. Harvey of Mill Valley, California.
مبتدی
About 2 hours

دستورالعمل‌ها

1

The partitions

در حال بارگذاری دفترچهٔ Jupyter…
2

Read The Boy Mechanic

"Two boards, 9 in. wide and about 3 ft. long, with six partitions between, as shown, will make pockets about 6 in. long. The width of the pockets at the bottom is 2 in. and at the top 5 in."
3

Cut the boards and partitions

Cut two pine boards 9 in wide and about 3 ft long, the back and the front. Cut six partitions as wedges from the notebook, 9 in tall, 2 in deep at the bottom and 5 in at the top.

مواد مورد نیاز این مرحله:

تختهٔ کاجتختهٔ کاج1 قطعه

ابزارهای مورد نیاز:

متر نواریمتر نواری
مدادمداد
گونیای ثابتگونیای ثابت
ارهٔ دستیارهٔ دستی
4

Assemble the pockets

Nail the partitions to the back board, square to it, one at each end and the rest spaced about 6 in apart. Nail the front board to their sloping edges, so it leans out and the pockets open wider at the top.

مواد مورد نیاز این مرحله:

میخمیخ1 قطعه

ابزارهای مورد نیاز:

چکش دوشاخچکش دوشاخ
5

Fit the slatted bottom

Nail strips across the bottom of the pockets with gaps between them, as his Fig. 1, so the dirt from the shoes falls through.

مواد مورد نیاز این مرحله:

نوارِ چوب سختنوارِ چوب سخت1 قطعه
میخمیخ1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
چکش دوشاخچکش دوشاخ
6

Hang it

Screw the back board to the wall of the clothes closet (ours), and put a pair of shoes toe-down in each pocket.

مواد مورد نیاز این مرحله:

پیچ چوبپیچ چوب1 قطعه

ابزارهای مورد نیاز:

دریل دستیدریل دستی
مجموعه پیچ‌گوشتیمجموعه پیچ‌گوشتی
7

Troubleshooting

Shoe rack troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Volume 1**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913 (Project Gutenberg #12655), "Homemade Shoe Rack", contributed by Guy H. Harvey of Mill Valley, California. The board sizes, pocket sizes and six partitions are the book's; the wood, nails, slat sizes and hanging screws are ours.

مواد

4
  • جایگزین
  • 2 قطعه
    جایگزین
  • جایگزین
  • 1 قطعه
    جایگزین

ابزارهای لازم

7
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...