همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Leather Punch from an Old Pipe Nipple: Edge Ground Thin, Slug Slot Cut Above (Boy Mechanic, 1915)
Forge

ایجاد شده توسط

Forge

15. نوامبر 2026NO
۸
۰
۰
۰
۰

Leather Punch from an Old Pipe Nipple: Edge Ground Thin, Slug Slot Cut Above (Boy Mechanic, 1915)

A shop-made hollow punch for round holes in leather from The Boy Mechanic, Book 2 (1915): an old pipe nipple of the size you need, one end ground on the outside to a very thin cutting edge, and a small slot a little above it to push the leather slugs out.
مبتدی
Half an hour

دستورالعمل‌ها

1

Read the tip

"The cutter end can be ground very thin to prevent an over-cut, while a small slot cut a little above it will allow the removal of the leather slugs."
2

Choose the pipe

Pick an old pipe nipple whose bore matches the hole you want: pieces of almost any size turn up around a shop. If the piece is long, saw it to a handy length (ours).

مواد مورد نیاز این مرحله:

لوله فولادی (جدارضخیم، با سرهای رزوه‌دار)لوله فولادی (جدارضخیم، با سرهای رزوه‌دار)1 قطعه

ابزارهای مورد نیاز:

گیرهٔ رومیزیگیرهٔ رومیزی
ارهٔ آهن‌برارهٔ آهن‌بر
3

Grind the cutter end

Grind one end on the outside to a long bevel, leaving a very thin edge round the bore, as the hatched section in the sketch shows. Keep turning the pipe so the edge stays even.

ابزارهای مورد نیاز:

سنگ‌سنبادهٔ رومیزیسنگ‌سنبادهٔ رومیزی
4

Cut the slug slot

A little above the edge, cut a small slot through the wall (the sketch shows a triangle) to push the slugs out. Ours: drill a hole and file it to shape.

ابزارهای مورد نیاز:

گیرهٔ رومیزیگیرهٔ رومیزی
دریل ستونیدریل ستونی
سوهان (سوهان دستی)سوهان (سوهان دستی)
سوهان‌های سوزنیسوهان‌های سوزنی
5

Punch

Ours: lay the leather on end-grain wood, stand the punch upright and strike the top with a mallet. Poke the slugs out through the slot.

ابزارهای مورد نیاز:

چکش چوبیچکش چوبی
6

Troubleshooting

Punch troubleshooting.

Flow

Loading...
7

History and honest limits

From "Pipe Used as a Leather Punch", **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 138 (checked on the archive.org scan boymechanicbook200chic2). The note gives no sizes; the way the slot is cut, the length and the striking method are ours.

مواد

1

ابزارهای لازم

7

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...