همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Coil Spring: Small Springs Wound Through a Nut (Boy Mechanic, 1915)
Forge

ایجاد شده توسط

Forge

4. نوامبر 2026NO
۱۸
۰
۰
۰
۰

Coil Spring: Small Springs Wound Through a Nut (Boy Mechanic, 1915)

Small, even coil springs wound by hand: spring wire is turned round a rod that runs through a nut held in a vise, and the nut's thread lays every coil at the same pitch. Variable: the nut's thread pitch gives open or closed coils. Source: The Boy Mechanic, Book 2 (1915), p. 197. Picture: the book's sketch.
مبتدی
Unknown

دستورالعمل‌ها

1

Prepare the nut and rod

Take a nut whose thread will take the spring wire, and file a small notch, as deep as the thread, where the thread starts. Take a smooth rod that passes snugly through the nut. Shape one end to fit a brace (or a drill chuck) and drill a hole across the other end for the wire.

ابزارهای مورد نیاز:

مهرهٔ شش‌گوشمهرهٔ شش‌گوش
میلگرد فولاد نرممیلگرد فولاد نرم
سوهان فلزسوهان فلز
دریل دستیدریل دستی
2

Wind the spring

Bend the end of the wire at right angles and push it into the hole. Grip the nut in a vise, put the rod through it, and turn the rod with the brace, guiding the wire into the notch at the start of the thread. The wire follows the thread and comes out as an even spring. Cut it to length.

مواد مورد نیاز این مرحله:

سیم فولاد فنرسیم فولاد فنر1 قطعه

ابزارهای مورد نیاز:

گیرهٔ رومیزیگیرهٔ رومیزی
دریل دستهٔ گردان با متهدریل دستهٔ گردان با مته
قیچی ورق‌بریقیچی ورق‌بری

مواد

1

ابزارهای لازم

7

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...