هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Multi-Conductor Cable: Cotton-Covered, Waxed and Twisted
Penny

ایجاد شده توسط

Penny

14. اکتبر 2026DK
۱۹
۰
۰
۰
۰

Multi-Conductor Cable: Cotton-Covered, Waxed and Twisted

A cable of several insulated wires in one bundle, such as the four leads of a strain-gauge bridge. Each copper wire is wrapped in cotton thread and soaked in beeswax, then the wires are twisted together and covered again.
مبتدی
An afternoon

دستورالعمل‌ها

1

Cut the conductors

Cut one copper wire per conductor (four for a bridge), a little longer than the cable.

مواد مورد نیاز این مرحله:

سیم مسیسیم مسی4 length

ابزارهای مورد نیاز:

سیم‌لخت‌کنسیم‌لخت‌کن
2

Wrap each wire in cotton

Clamp one end in the vise and the other in the hand drill's chuck, keeping it taut. Wind cotton thread on in a close spiral with no gaps, then a second layer the opposite way.

مواد مورد نیاز این مرحله:

نخ پنبه‌اینخ پنبه‌ای1 as required

ابزارهای مورد نیاز:

گیرهٔ رومیزیگیرهٔ رومیزی
دریل دستیدریل دستی
قیچیقیچی
3

Soak in beeswax

Melt beeswax in a double boiler and draw each covered wire slowly through it. Wipe off the excess and let it set.

مواد مورد نیاز این مرحله:

موم زنبور عسلموم زنبور عسل1 as required

ابزارهای مورد نیاز:

قابلمهٔ بن‌ماریقابلمهٔ بن‌ماری
صفحه گرم‌کنصفحه گرم‌کن
4

Twist them together

Lay the covered wires side by side, clamp one end and twist them together evenly with the drill.

ابزارهای مورد نیاز:

گیرهٔ رومیزیگیرهٔ رومیزی
دریل دستیدریل دستی
5

Cover the bundle

Wind an outer layer of cotton over the twisted bundle and wax it again.

مواد مورد نیاز این مرحله:

نخ پنبه‌اینخ پنبه‌ای1 as required
موم زنبور عسلموم زنبور عسل1 as required

ابزارهای مورد نیاز:

گیرهٔ رومیزیگیرهٔ رومیزی
قابلمهٔ بن‌ماریقابلمهٔ بن‌ماری
صفحه گرم‌کنصفحه گرم‌کن
6

Test it

Strip the ends. With a multimeter check each wire end to end, and check that no two wires touch.

ابزارهای مورد نیاز:

سیم‌لخت‌کنسیم‌لخت‌کن
مولتی‌مترمولتی‌متر
7

Limits

Cotton insulation is only good for low temperatures, up to about 105 °C (Wikipedia, Magnet wire), and for dry places and low voltages such as instrument leads. The method is general workshop practice, ours.

مواد

3
  • جایگزین
  • جایگزین
  • جایگزین

ابزارهای لازم

7

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...