همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Electric Soldering Iron: Miner, 1890
English
Ed

ایجاد شده توسط

Ed

12. اکتبر 2026FI
۲۴
۰
۰
۰
۰

Electric Soldering Iron: Miner, 1890

Earlier electric soldering irons heated a hollow copper head from inside, through finely divided carbon pressed against the tip, so the whole outside of the head lost heat to the air. Willard M. Miner of Plainfield, New Jersey, patented the alternative in 1890, US 421,185: keep the copper head solid, which holds its heat longer, and wind the heating resistance round the outside of it, under a shell that concentrates the heat on the copper and stops it escaping. The coil is German silver wire, wound round a reduced part of the head without touching it, with one end connected to the head and the other to the supply.
متوسط
Workshop process

دستورالعمل‌ها

1

Turn the head

Turn a solid copper head with its point. A little back from the point, cut the head down to a smaller diameter for some distance, leaving a shoulder, and thread a shank at its rear end.

مواد مورد نیاز این مرحله:

میلگرد گرد مسیمیلگرد گرد مسی1 قطعه

ابزارهای مورد نیاز:

تراش فلزتراش فلز
2

Wind the coil

Coil German silver wire round the reduced part of the head, the coil slightly larger than the head so the two do not touch. Connect one end of the coil to the head at the shoulder; the other end goes to the supply.

مواد مورد نیاز این مرحله:

سیم مقاومتی ورشوسیم مقاومتی ورشو1 as required

ابزارهای مورد نیاز:

انبردستانبردست
3

Shell

Slip on the shell, of brass lined with non-conducting material. Close its inner end with an insulating disc held by a washer and nut on the threaded shank.

مواد مورد نیاز این مرحله:

پوستهٔ برنجی آستردارپوستهٔ برنجی آستردار1 قطعه
دیسک انتهایی عایقدیسک انتهایی عایق1 قطعه

ابزارهای مورد نیاز:

آچار فرانسهآچار فرانسه
4

Handle

Screw the shank into the metal socket in the handle, which takes the second connection.

مواد مورد نیاز این مرحله:

چوب سخت برای دستهچوب سخت برای دسته1 قطعه

مواد

5

ابزارهای لازم

3
  • جایگزین
  • جایگزین
  • جایگزین

این نقشه می‌سازد

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...