همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Enamelled Copper Magnet Wire
Magnet wire, the wire wound into motors, transformers, coils and loudspeakers, is copper wire with a very thin layer of insulation. Despite the name, the "enamel" is not glass but a polymer film. The usual process runs in one continuous line: the wire is annealed to make it soft and flexible, passes through a bath of enamel, a polymer such as polyurethane, polyester, polyamide or polyimide dissolved in solvent, then through a die that leaves only a thin even layer, and up through a vertical oven that first drives off the solvent and then cures the film. One coat is too thin, so the wire goes round many times, building the insulation up layer by layer.
پیشرفته
Continuous (industrial)
دستورالعملها
1
1
Anneal
Anneal
Copper wire of the final diameter runs through an annealing oven to make it soft and flexible.
مواد مورد نیاز این مرحله:
سیم مسی100 کیلوگرمابزارهای مورد نیاز:
کورهٔ تابکاری2
2
Coat
Coat
The wire passes through a bath of enamel, a polymer dissolved in solvent.
مواد مورد نیاز این مرحله:
لعاب سیم (محلول پلیمری)5 لیترابزارهای مورد نیاز:
خط لعابزنی سیم3
3
Size the coat
Size the coat
A die lets through only the wire and a thin layer of enamel; the rest is wiped back.
ابزارهای مورد نیاز:
خط لعابزنی سیم4
4
Dry and cure
Dry and cure
The wire rises through a vertical oven: cooler at the bottom to drive off the solvent, hotter at the top to cure the film.
ابزارهای مورد نیاز:
خط لعابزنی سیم5
5
Repeat and check
Repeat and check
The wire makes several passes until the insulation is thick enough, then the overall diameter is measured and it is spooled.
ابزارهای مورد نیاز:
خط لعابزنی سیم
میکرومتراین نقشه میسازد
نقشههای مرتبط
این نقشهها دانش مشترکی دارند — تکنیکها، مواد یا اصول
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.


