هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Flax Scutching
Tex

ایجاد شده توسط

Tex

20. اوت 2026FO
۱
۰
۰
۰
۰

Flax Scutching

Linen fibre runs the whole length of the flax stem, but it is glued into a woody core and wrapped in a bark-like skin, and every bit of that has to come away without breaking the fibre. Retting rots the pectin glue; scutching removes the wreckage. First the brittle woody core is snapped into short lengths in a hinged wooden brake, then the broken pieces — the shives — are beaten out by striking the hanging bundle downward with a wooden blade against a board, and finally the fibre is drawn through beds of iron spikes to comb out the last of it and align what remains. Every stage is subtraction. You start with a plant and end with nothing but the long fibres, and it is filthy, dusty, rhythmic work.
متوسط
2 hours

دستورالعمل‌ها

1

Check the retting was right

Everything downstream depends on this and it cannot be corrected later.

  1. Take a retted stem and snap it.
  2. Try to peel the fibre away from the woody core.
  3. It should separate cleanly with a slight rasping sound.
Under-retted and the fibre stays glued to the core and tears out with it. Over-retted and the fibre itself has begun to rot and comes away weak and grey. There is no fixing either — retting is a controlled decay stopped at the right moment, and judging that moment was the most skilled job in the whole process.

مواد مورد نیاز این مرحله:

Hemp FibreHemp Fibre500 گرم
2

Break the woody core

A hinged wooden blade crushes the stem without cutting the fibre.

  1. Lay a handful of stems across the bed of the brake.
  2. Bring the upper blade down repeatedly, moving the bundle along.
  3. Turn the bundle and repeat until it feels soft and rattles.
The blades are blunt and wooden on purpose. Anything sharp would sever the fibre along with the core — you want to shatter the brittle wood while the flexible fibre simply bends. Brittle versus flexible is the entire separation principle.

مواد مورد نیاز این مرحله:

Flax Brake (m'ialka)Flax Brake (m'ialka)1 قطعه
3

Scutch the shives out

Beat downward, along the fibre, never across it.

  1. Hang a bundle over the edge of an upright board.
  2. Strike downward with a wooden scutching blade, sweeping along the length.
  3. Work outdoors or with good extraction — this raises enormous dust.
Downward and along. A cross-blow snaps the fibres and turns line flax into tow. The falling debris is the shives; the short broken fibre that comes with it is tow, worth keeping but coarser, and the long fibre left in your hand is line, which is what fine linen is made of.

مواد مورد نیاز این مرحله:

White Oak BoardWhite Oak Board1 board
4

Hackle from coarse to fine

Draw the fibre through beds of spikes, each finer than the last.

  1. Pull the bundle through a coarse hackle, a little at a time.
  2. Repeat through progressively finer spike beds.
  3. Keep what comes out in your hand; keep separately what stays in the spikes.
Hackling does two jobs at once — it combs out remaining shives and short fibre, and it lays the long fibres parallel. Weigh the line, the tow and the waste at the end: from raw straw, the yield of true line flax is a small fraction of what you started with, and that is why linen was never cheap.

مواد مورد نیاز این مرحله:

Digital Kitchen ScaleDigital Kitchen Scale1 قطعه
5

History and context

Flax is among the oldest cultivated fibres — spun flax fibres from Dzudzuana Cave in Georgia have been dated to around 30,000 years ago, which makes linen older than pottery or agriculture. Egyptian linen is famously fine, and the mummy wrappings are the surviving evidence of an industry.

The work was seasonal, communal and mostly done by women. Scutching and hackling happened in winter after harvest, often as a shared gathering — the Irish and Scottish scutching mills later mechanised the beating with water-powered blades, and those mills were notoriously dangerous and unhealthy places.

Flax dust causes real disease. Prolonged exposure to flax, hemp and cotton dust causes byssinosis — chest tightness and breathlessness that begins on the first day back after a break, which is why it was called Monday fever. It was documented in the linen and cotton mills of Belfast, Dundee and Lancashire and was disputed as an occupational disease for decades. Do this work outdoors or with extraction, and do not romanticise the mills.

Why linen and cotton feel different: flax fibre is a long single cell with a stiff crystalline structure, so linen is strong, cool, poor at stretching and creases sharply. Cotton is a short twisted fibre and behaves nothing like it. Linen also gets STRONGER when wet, which is unusual and is why it was used for sailcloth, sacking and thread.

What happened to it: cheap cotton from mechanised spinning undercut linen in the nineteenth century for everyday cloth, and flax retreated to fine linens and to industrial uses. It is returning modestly as a low-input crop and as reinforcement in composites, where its stiffness-to-weight is genuinely competitive.

مواد

4

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...