هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)
Charlie

ایجاد شده توسط

Charlie

29. اکتبر 2026DE
۲
۰
۰
۰
۰

Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)

Straight distillation leaves most of a barrel of crude as heavy oil. Burton's 1913 patent turns that residue into gasoline: distil it hot while its own vapour is held at 4 to 5 atmospheres, all the way through the condenser. The heat and pressure break the heavy oil into light oil. Cracked gasoline is the first rung toward high-octane fuel. Feed: the fuel-oil and gas-oil residue left after the light cuts, boiling at about 600 to 700 °F (claim: above 500 °F). Source: W. M. Burton, US 1,049,667 (1913), assigned to Standard Oil (Indiana). Not given: charge size, run time, yield. Burton claims the gasoline stays in the paraffin series; that is his claim. A fired still under pressure needs a working safety valve. Picture: the patent drawing.
متخصص
2 days

دستورالعمل‌ها

1

Fill the pressure still with residue

The still is a closed, boiler-like holder over a fire chamber, with a safety valve, a pressure gauge, and a thermometer in an oil-filled tube slanting into it. Fill it with the heavy residue left after the gasoline and illuminating oils have been distilled off.

مواد مورد نیاز این مرحله:

ته‌ماندهٔ نفتته‌ماندهٔ نفت1 still charge

ابزارهای مورد نیاز:

دیگ تقطیر فشاریدیگ تقطیر فشاری
فشارسنجفشارسنج
دماسنجدماسنج
2

Close the outlet and fire it

A pipe rises from the top of the still to a water-cooled condenser coil, then runs to a receiver tank. Keep the shut-off valve after the coil closed and fire the still. The vapours build up 4 to 5 atmospheres on the liquid, and its boiling point rises from 500-600 °F to 750-800 °F.

ابزارهای مورد نیاز:

دیگ تقطیر فشاریدیگ تقطیر فشاری
مارپیچ چگالندهمارپیچ چگالنده
آبآب
فشارسنجفشارسنج
3

Distil at 650 to 850 °F under pressure

Distil at about 650 to 850 °F. Keep the pressure on the vapours the whole way, in the still and while they condense in the coil. The heat and pressure turn the heavy oil into low-boiling oil.

ابزارهای مورد نیاز:

دیگ تقطیر فشاریدیگ تقطیر فشاری
دماسنجدماسنج
فشارسنجفشارسنج
4

Draw off the gasoline from time to time

Open the shut-off valve now and then to run the condensed gasoline into the receiver. Do it often enough that the coil never fills with liquid.

ابزارهای مورد نیاز:

مارپیچ چگالندهمارپیچ چگالنده
مخزن نفتمخزن نفت
5

Let off the gas

Gas that will not condense collects in the coil and blocks it. Release it from time to time through the relief valve on the pipe rising from the lower end of the coil. Burton does not say what becomes of it. Ours: collect it under pressure if it is to be used.

ابزارهای مورد نیاز:

مارپیچ چگالندهمارپیچ چگالنده
کپسول گاز تحت فشارکپسول گاز تحت فشار

مواد

1

ابزارهای لازم

7

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...