همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)
Woody

ایجاد شده توسط

Woody

15. نوامبر 2026NO
۷
۰
۰
۰
۰

Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)

How the Haida, Tlingit and Tsimshian made the carved crest columns we call totem poles, as Albert Niblack recorded them around 1888: a cedar log got out of the forest and hauled up on skids, adzed smooth, relief-carved with the owner's clan crest at the top and his wife's crest and family legends below, painted with ochre or lignite ground with salmon eggs, and raised with poles, props and rope guys into a deep hole at a potlatch.
پیشرفته
Months to years

دستورالعمل‌ها

1

Read Niblack

"These are the very tall ones erected in front of the houses, and are generally surmounted by the clan-totem of the chief occupant."
2

Plan the crests

The column tells whose it is: the owner's clan crest at the top (among the Tlingit often the phratry crest, with clan crests below), his wife's crest, which is also his children's, below it, or a family legend tied to his crest. The figures are the owner's own; carve your own family's story, not a copy of someone else's pole (ours).
3

Get out the log

Fell a large, straight cedar (ours: western red cedar). Split off what is not wanted with wedges and get the timber out in the rough in the forest, then tow or haul it to the site and lift it onto skids.

مواد مورد نیاز این مرحله:

کندهٔ سدر سرخکندهٔ سدر سرخ1 قطعه

ابزارهای مورد نیاز:

تبرتبر
گوه‌های چوبیگوه‌های چوبی
چکش چوبیچکش چوبی
طنابطناب
تیرک چوبیتیرک چوبی
4

Smooth the log

On the skids, smooth-finish the log with the adze. The old blades were green jade-like stone; in Niblack's day the favourite was the end of a broad flat file ground sharp and hafted.

ابزارهای مورد نیاز:

تیشهتیشه
5

Carve in relief

Carve the crests in relief: rough down the surface with the chisel and adze, then smooth by scraping with sharp-edged shells or stones, or rub with dogfish skin for a finished surface. The carving was done by the owner if he was expert, or by carvers he hired.

مواد مورد نیاز این مرحله:

پوست سگ‌ماهیپوست سگ‌ماهی1 قطعه

ابزارهای مورد نیاز:

تیشهتیشه
مجموعه اسکنهٔ چوبمجموعه اسکنهٔ چوب
چکش چوبیچکش چوبی
6

Grind the paint and paint

Grind red or brown ochre, charcoal or lignite in a stone mortar. For a lasting black on wood, grind lignite dry with salmon eggs first chewed with cedar bark: it gives the paint body and makes it stick. Paint the figures with hair or fibre brushes (in older times columns were simply daubed with ochre).

مواد مورد نیاز این مرحله:

اُخرای خاماُخرای خام1 قطعه
زغال چوبزغال چوب1 قطعه
لیگنیتلیگنیت1 قطعه
خاویار ماهی آزادخاویار ماهی آزاد1 قطعه
پوست درونی سدر سرخپوست درونی سدر سرخ1 قطعه

ابزارهای مورد نیاز:

هاون و دستهٔ هاون سنگیهاون و دستهٔ هاون سنگی
قلم‌موی نازکقلم‌موی نازک
7

Raise the column

Dig a deep hole in front of the house (ours: about a fifth of the pole's length, and well clear of the house front unless you are making a Haida doorway pole). Raise the column with poles, props and rope guys, many people pulling together, set its foot in the hole and pack it firm.

ابزارهای مورد نیاز:

بیلبیل
طنابطناب
تیرک چوبیتیرک چوبی
8

Troubleshooting

Totem pole troubleshooting.

Flow

Loading...
9

History and honest limits

From Albert P. Niblack, *The Coast Indians of Southern Alaska and Northern British Columbia*, **Report of the U.S. National Museum for 1888** (1890), pp. 279-282, 307-309, 319-320, 324 and Plate II (checked on the archive.org scan coastindiansofso00nibl). Among the Haida the column usually stood against the house with the doorway cut through it about three feet up; others stood a few feet in front. Raising was a potlatch: feasting, dancing and gifts, the work itself a small part of the time. Only the wealthy could afford one. Niblack gives no sizes or carving order: species, sizes, hole depth and the order of work are ours.

مواد

7

ابزارهای لازم

10

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...