هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Plain-Weave Cotton Cloth on a Rigid Heddle Loom
Tex

ایجاد شده توسط

Tex

11. اکتبر 2026FO
۳۸
۰
۰
۰
۰

Plain-Weave Cotton Cloth on a Rigid Heddle Loom

Plain weave is the simplest cloth: each crosswise thread goes over one lengthwise thread and under the next, and back the other way on the next pass. A rigid heddle loom does the lifting: one bar of slots and holes raises or lowers every other warp thread at once. The thread is the 2-ply cotton from the hand-spinning blueprint, used for both warp and weft.
متوسط
About a week of evenings

دستورالعمل‌ها

1

The thread

Spinning and plying the cotton thread used here.
2

Find the sett

Wrap the thread round a ruler, touching but not crowded, and count the wraps in 2.5 cm. For plain weave set the warp at about half that many threads per 2.5 cm, and choose the heddle to match.

ابزارهای مورد نیاز:

خط‌کشخط‌کش
3

Measure the warp

On the warping board wind as many threads as the width times the sett, each the cloth's length plus about 50 cm for tying on and loom waste.

مواد مورد نیاز این مرحله:

نخ پنبه‌اینخ پنبه‌ای150 گرم

ابزارهای مورد نیاز:

تختهٔ چله‌کشیتختهٔ چله‌کشی
متر نواریمتر نواری
4

Thread the heddle

Thread one warp end through each slot and each hole in turn, tie the ends to the back beam, wind on under even tension and tie on at the front.

ابزارهای مورد نیاز:

دار بافندگی با شانهٔ سختدار بافندگی با شانهٔ سخت
5

Weave

Raise the heddle, pass the shuttle through, beat the weft gently with the heddle; lower the heddle, pass back, beat. Leave the weft at a slant across the shed so the edges do not pull in.

مواد مورد نیاز این مرحله:

نخ پنبه‌اینخ پنبه‌ای120 گرم

ابزارهای مورد نیاز:

دار بافندگی با شانهٔ سختدار بافندگی با شانهٔ سخت
ماکوی بافندگیماکوی بافندگی
6

Cut off and secure

Cut the cloth off the loom and knot or hem both ends so the weft cannot slip off.

ابزارهای مورد نیاز:

قیچی خیاطیقیچی خیاطی
7

Wash to finish

Wash the cloth in hot water, dry it, and measure it: the threads relax and close up. Note how much it shrank for the next warp.

ابزارهای مورد نیاز:

متر نواریمتر نواری
8

Troubleshooting

Plain weave troubleshooting.

Flow

Loading...

مواد

1

ابزارهای لازم

6

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...