همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Saddler's Stitching Clamp from Two Oak Barrel Staves Screwed to a Deal Tenon (Hasluck, Harness Making, 1904)
Woody

ایجاد شده توسط

Woody

14. نوامبر 2026NO
۹
۰
۰
۰
۰

Saddler's Stitching Clamp from Two Oak Barrel Staves Screwed to a Deal Tenon (Hasluck, Harness Making, 1904)

The home-made saddler's clamp, or pair of clams, from Hasluck's Harness Making (1904): two curved oak barrel staves, thinned to springy jaws, screwed hard onto a dovetail-shaped tenon on a 20 x 3 x 3 in. deal post so the jaw tips grip the leather while both hands sew.
مبتدی
An afternoon

دستورالعمل‌ها

1

His sizes

در حال بارگذاری دفترچهٔ Jupyter…
2

Read Hasluck

"A clamp can be made easily by the worker at home."
3

Cut the staves

Cut two oak cask or barrel staves 2 ft (610 mm) long and at least 3 in. (76 mm) wide, with the greatest bend in the middle. The more bent the staves, the more useful the clamp.

مواد مورد نیاز این مرحله:

تختهٔ بشکهتختهٔ بشکه2 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
4

Shape the jaws

Clean up the outside with a spokeshave. Leave one end the full stave thickness (about 1 in., 25 mm) and thin gradually to about 3/4 in. (19 mm) toward the other end, which forms the jaw (his fig. 55). Round the outer corners, plane the inside flat and smooth both sides with glass-paper.

مواد مورد نیاز این مرحله:

کاغذ سنبادهکاغذ سنباده1 قطعه

ابزارهای مورد نیاز:

رندهٔ دودستهرندهٔ دودسته
5

Cut the tenon

Take a sound piece of white deal 20 x 3 x 3 in. (510 x 76 x 76 mm) for the post C. Cut a dovetail-shaped tenon at least 6 in. (150 mm) long on its upper end. Fit the depth of the shoulders and the width at the top to the curve of your staves: the aim is for the jaw tips to press tightly together once the staves are home.

مواد مورد نیاز این مرحله:

تیرک چوب نرمتیرک چوب نرم1 قطعه

ابزارهای مورد نیاز:

اره پشت‌داراره پشت‌دار
مجموعه اسکنهٔ چوبمجموعه اسکنهٔ چوب
6

Screw the staves on

Lay the thick ends of the staves against the two sides of the tenon and fix them with eight stout 2 1/4 in. (57 mm) screws (ours: four through each stave, as his fig. 54 shows). The tenon should be cut so that hard screwing is needed to bring the staves home. Countersink the screws flush with the stave faces.

مواد مورد نیاز این مرحله:

پیچ چوبپیچ چوب8 قطعه

ابزارهای مورد نیاز:

دریل دستهٔ گردان با متهدریل دستهٔ گردان با مته
ست مته خزینهست مته خزینه
پیچ‌گوشتی تختپیچ‌گوشتی تخت
7

Troubleshooting

Clamp troubleshooting.

Flow

Loading...
8

History and honest limits

From Paul N. Hasluck (ed.), **Harness Making** (Cassell, 1904), pp. 24-27 and figs. 52-55 (checked on the archive.org scan harnessmaking00hasl). The saddler sits with it between the knees, slanting against the left knee, the right leg thrown over it, so it does not yield under the awl. He gives no screw spacing; the four-per-stave layout, metric figures and tools are ours.

مواد

4
  • جایگزین
  • جایگزین
  • جایگزین
  • 8 قطعه
    جایگزین

ابزارهای لازم

7

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...