همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)
Tex

ایجاد شده توسط

Tex

13. نوامبر 2026FO
۹
۰
۰
۰
۰

Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)

When two horses plough side by side, a coupling strap ties them together so they keep level. This is the coupling from Paul N. Hasluck's Harness Making (1904): a 1 in strap 28 in to 30 in long with a buckled billet at each end, buckled from the mouth of one horse to the other. Every size is his; the picture is our diagram.
مبتدی
About 2 hours

دستورالعمل‌ها

1

His sizes in centimetres

در حال بارگذاری دفترچهٔ Jupyter…
2

Read Harness Making, ch. IX

"Couplings are also a necessary part of plough gear. In some localities only cross-straps are employed from mouth to mouth when ploughing in pairs."
3

Cut the strap

Cut the strap 1 in wide and 28 in to 30 in long. Turn it in about 1 in at each end, make a hole for the buckle, and shave the points.

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
منگنهٔ سوراخ‌کن چرممنگنهٔ سوراخ‌کن چرم
متر نواریمتر نواری
4

Make the billets

Cut two billets the same width, 1 ft long; trim them to a point at one end and shave the other. Edge them and crease them (the book prints "edge back, and crease them", probably for "edge, black").

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه
رنگ چرمرنگ چرم1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
ابزار پخ‌زنی لبهابزار پخ‌زنی لبه
ابزار تاخورابزار تاخور
مشعل پروپانمشعل پروپان
5

Put it together

Put the buckle in, then the thin end of the billet 2 in down at the back of the buckle. Put a loop between the chape by the buckle, and stitch one billet and buckle at each end. Punch two holes in each billet.

مواد مورد نیاز این مرحله:

سگک آهنی زبانه‌دارسگک آهنی زبانه‌دار2 قطعه
چرم یراقچرم یراق1 قطعه
نخ چرمینخ چرمی1 قطعه
موم زنبور عسلموم زنبور عسل1 قطعه

ابزارهای مورد نیاز:

قالب حلقهٔ تسمهقالب حلقهٔ تسمه
درفشدرفش
دو سوزن سراجیدو سوزن سراجی
گیره دوخت چرمگیره دوخت چرم
منگنهٔ سوراخ‌کن چرممنگنهٔ سوراخ‌کن چرم
6

Crossing couplings for a pair

Sometimes two coupling straps are used for a pair, crossing each other from the hames of each horse to the mouth of the other. Make them the same way but longer: 38 in, each with 12 in billets. Some are made a foot longer and cut in two, one end 15 in long with a buckle and loop and the other made to buckle on, with many holes. Then the coupling can be shortened on a young horse's side, to keep it back until it has learned the ordinary working pace.

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه
سگک آهنی زبانه‌دارسگک آهنی زبانه‌دار4 قطعه
نخ چرمینخ چرمی1 قطعه
موم زنبور عسلموم زنبور عسل1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
قالب حلقهٔ تسمهقالب حلقهٔ تسمه
درفشدرفش
دو سوزن سراجیدو سوزن سراجی
منگنهٔ سوراخ‌کن چرممنگنهٔ سوراخ‌کن چرم
متر نواریمتر نواری
7

Troubleshooting

Coupling strap troubleshooting.

Flow

Loading...
8

History and honest limits

From **Harness Making**, edited by Paul N. Hasluck, Cassell, 1904 (Project Gutenberg 70169), chapter IX, "Plough Harness", couplings, pp. 110-111; every figure was checked on the archive.org scan (harnessmaking00hasl). He gives no buckle size; a 1 in buckle suits the 1 in strap. The picture is our diagram from his text. The tools and metric figures are ours.

مواد

5

ابزارهای لازم

10

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...