همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)
Tex

ایجاد شده توسط

Tex

13. نوامبر 2026FO
۴
۰
۰
۰
۰

Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)

The plain riding bridle, "a single head and rein bridle", from Paul N. Hasluck's Saddlery (1904): two cheeks buckled to a snaffle bit, a head strap slit at each end into cheek and throat-lash straps, a front (browband), a throat lash and a pair of buckled reins. Every size is his; the bit is bought. It is the riding counterpart of the cart bridle.
متوسط
About 1 day

دستورالعمل‌ها

1

Cutting list

در حال بارگذاری دفترچهٔ Jupyter…
2

Read Saddlery, ch. VI

"All the stitching must be done from behind, so that the best face of the stitches will be next the horse when the bridle is on."
3

Make the cheeks

Cut two cheeks about 7/8 in wide and 9 in long. Each has a buckle at each end: one on a chape turned down, the other on the flat end of the strap without turning, with the billet underneath. Leave room for a loop before the buckle and the point of the cheek, and set the billet far enough behind the buckle for two loops; put a runner loop on the cheek and stitch another in with the chape. Cut the billets 9 in long. Stitch them in single-handed and back-stitch with linen thread, all from behind. Make one hole in each billet.

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه
سگک برنجی با زبانهسگک برنجی با زبانه4 قطعه
نخ کتاننخ کتان1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
ابزار پخ‌زنی لبهابزار پخ‌زنی لبه
ابزار تاخورابزار تاخور
قلم کوک چرمقلم کوک چرم
درفشدرفش
دو سوزن سراجیدو سوزن سراجی
گیره دوخت چرمگیره دوخت چرم
قالب حلقهٔ تسمهقالب حلقهٔ تسمه
منگنهٔ سوراخ‌کن چرممنگنهٔ سوراخ‌کن چرم
4

Make the head strap

Cut the head strap 1-1/8 in by 1 ft 10 in and slit it 5 in at each end. For a 3/4 in cheek, slit 3/4 in on one side and 3/8 in for a 3/8 in throat lash, with the wide slits on the same side at both ends. Punch four holes in each wide slit and six, closer together, in each narrow one.

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
منگنهٔ سوراخ‌کن چرممنگنهٔ سوراخ‌کن چرم
متر نواریمتر نواری
5

Make the front

Cut the front 3/4 in by 1 ft 2-1/4 in from the end of one bend to the other, after bending. Turn it over the head strap and mark a line across close to it, so there is 1 ft 1 in between the cross lines. Stitch the ends down, with a row along each side.

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه
نخ کتاننخ کتان1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
قلم کوک چرمقلم کوک چرم
درفشدرفش
دو سوزن سراجیدو سوزن سراجی
6

Make the throat lash

Make the throat lash 3/8 in by 1 ft 7 in after turning down for the buckles. Put two runner loops on it besides the loops at the buckles of each end.

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه
سگک برنجی با زبانهسگک برنجی با زبانه2 قطعه
نخ کتاننخ کتان1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
درفشدرفش
دو سوزن سراجیدو سوزن سراجی
قالب حلقهٔ تسمهقالب حلقهٔ تسمه
7

Make the reins

Cut the reins 1 in or 7/8 in by 4 ft. Prepare them for the bit buckles like the bottom of the cheeks, in the flat. Put a 3/4 in covered buckle on the other end of one rein, narrowing its chape to the buckle's width, and narrow the end of the other rein for buckling. Put in the billets, 10 in long, with one loop before the buckle and two behind, "and always put the strong end of the rein in the billet end".

مواد مورد نیاز این مرحله:

چرم یراقچرم یراق1 قطعه
سگک برنجی با زبانهسگک برنجی با زبانه3 قطعه
نخ کتاننخ کتان1 قطعه

ابزارهای مورد نیاز:

کارد چرم‌بریکارد چرم‌بری
درفشدرفش
دو سوزن سراجیدو سوزن سراجی
قالب حلقهٔ تسمهقالب حلقهٔ تسمه
8

Put it together

Buckle the cheeks to the head strap's wide slits and the throat lash to the narrow ones, run the front over the head strap, buckle the cheeks' lower ends and the reins to the snaffle bit's rings, and buckle the two reins together. Buckled billets let the bit be taken off, which he prefers to stitching the cheeks and reins fast to it.

مواد مورد نیاز این مرحله:

دهنهٔ اسنافلدهنهٔ اسنافل1 قطعه
9

Troubleshooting

Riding bridle troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter VI, "Riding Bridles", the snaffle bridle; every fraction was read on the scan. Not made here: his Pelham, Weymouth, gag, exercising and stallion bridles. The bit is bought. The metric figures are ours.

مواد

4

ابزارهای لازم

10

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...