همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Homemade Hacksaw Frame Cut from Hard Wood (Boy Mechanic, 1915)
Woody

ایجاد شده توسط

Woody

14. نوامبر 2026NO
۱۲
۰
۰
۰
۰

Homemade Hacksaw Frame Cut from Hard Wood (Boy Mechanic, 1915)

A hacksaw frame sawn from one piece of hard wood: the blade is bolted into a slot at the handle end and tensioned at the far end by a bolt with a bent sheet-metal head whose tongue sits in a saw cut so the blade cannot twist.
مبتدی
Two hours

دستورالعمل‌ها

1

Read the Boy Mechanic

"The frame is made of hard wood. The saw end is inserted in a slot sawed in the handle end, and a screw or small bolt holds it in place."
2

Cut the frame

Saw the frame from one piece of hard wood as in the figure: a long back with a handle end (with a hand-hole) and a short far end, open between them for the blade.

مواد مورد نیاز این مرحله:

تختهٔ چوب سختتختهٔ چوب سخت1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
ارهٔ موییارهٔ مویی
دریل دستهٔ گردان با متهدریل دستهٔ گردان با مته
سوهان (سوهان دستی)سوهان (سوهان دستی)
3

Fix the handle end

Saw a slot in the handle end, slip one end of the blade in, and hold it with a screw or small bolt through the blade's hole.

مواد مورد نیاز این مرحله:

تیغهٔ ارهٔ آهن‌برتیغهٔ ارهٔ آهن‌بر1 قطعه
پیچ سرگرد گردن‌چهارگوشپیچ سرگرد گردن‌چهارگوش1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
دریل دستیدریل دستی
4

Make the tension bolt

Bend a sheet-metal head onto a bolt (A in the figure) and fix the blade's other end to it. Pass the bolt through the far end of the frame and tighten its nut to draw the blade taut. A projection of the sheet metal fits a saw cut in the frame so the blade cannot turn.

مواد مورد نیاز این مرحله:

ورق حلبیورق حلبی1 قطعه
پیچ سرگرد گردن‌چهارگوشپیچ سرگرد گردن‌چهارگوش1 قطعه
مهره بالدارمهره بالدار1 قطعه

ابزارهای مورد نیاز:

قیچی ورق‌بریقیچی ورق‌بری
انبردست تختانبردست تخت
دریل دستیدریل دستی
ارهٔ دستیارهٔ دستی
5

Troubleshooting

Wooden hacksaw troubleshooting.

Flow

Loading...
6

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 426, by W. A. Henry (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the wing nut and tools are ours.

مواد

5

ابزارهای لازم

7

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...