همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Home-Made Screw Micrometer: a Fine-Threaded Bolt and a Paper Dial (Boy Mechanic, 1913)
Penny

ایجاد شده توسط

Penny

14. نوامبر 2026DK
۱۰
۰
۰
۰
۰

Home-Made Screw Micrometer: a Fine-Threaded Bolt and a Paper Dial (Boy Mechanic, 1913)

A simple micrometer for measuring thin things: a fine-threaded bolt turns through a nut set in a small wooden bench, a wire pointer soldered to its head sweeps a graduated pasteboard dial, and each turn moves the tip down by one thread.
مبتدی
Two hours

دستورالعمل‌ها

1

Reading the dial

در حال بارگذاری دفترچهٔ Jupyter…
2

Read the Boy Mechanic

"A simple, fairly accurate, and easily made apparatus of the micrometer form may be constructed."
3

Choose the bolt

Get an iron or brass bolt about 1/4 in across and 2-1/2 in long with as fine a thread as possible, threaded nearly to the head, with its nut. Cut a screwdriver slot in the head.

مواد مورد نیاز این مرحله:

پیچ‌های ماشینیپیچ‌های ماشینی1 قطعه
مهرهٔ شش‌گوشمهرهٔ شش‌گوش1 قطعه

ابزارهای مورد نیاز:

ارهٔ آهن‌برارهٔ آهن‌بر
گیرهٔ رومیزیگیرهٔ رومیزی
4

Make the bench

Clamp two square-cornered wood blocks (about 1 x 3/4 x 2-1/2 in) side by side and nail small pieces across the ends; together they are about 2 in wide. Bore a 1/4 in hole through the centre in the 2 in direction. Unclamp, set the nut into one block in line with the hole, then cut a piece out so the blocks form a little bench. Glue its legs to a thin board about 2-1/2 in square.

مواد مورد نیاز این مرحله:

تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
میخمیخ1 قطعه
چسب چوبچسب چوب1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
دریل دستهٔ گردان با متهدریل دستهٔ گردان با مته
گیرهٔ میله‌ایگیرهٔ میله‌ای
اسکنه‌هااسکنه‌ها
چکشچکش
5

Pointer and dial

Solder a stiff wire about 2 in long to the bolt head at right angles. Cut a disc of heavy pasteboard with a radius equal to the wire, divide its edge into equal spaces, and fix it on top of the bench. Screw the bolt down through the nut.

مواد مورد نیاز این مرحله:

سیم آهنیسیم آهنی1 قطعه
لحیم قلع-سربلحیم قلع-سرب1 قطعه
مقوای چسباندهمقوای چسبانده1 قطعه

ابزارهای مورد نیاز:

هویههویه
قطب‌نماقطب‌نما
6

Anvil

Fix a small piece of wood on the base between the bench legs and glue a small piece of metal on it where the bolt meets it.

مواد مورد نیاز این مرحله:

تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
چسب چوبچسب چوب1 قطعه
7

Calibrate and measure

Count the threads in one inch of the bolt on a rule: one turn moves the tip one thread. To measure, screw down onto the object, remove it, screw down to the base, and note how far the wire travels over the dial. Turns (with the part of a turn) divided by threads per inch = thickness in inches.

ابزارهای مورد نیاز:

خط‌کشخط‌کش
8

Troubleshooting

Micrometer troubleshooting.

Flow

Loading...
9

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), p. 130, credited to the Scientific American (checked on the archive.org scan boymechanic0000unse_n5a8). The 1/4-20 bolt and 50-division dial are our example.

مواد

8
  • جایگزین
  • جایگزین
  • جایگزین
  • 1 قطعه
    جایگزین
  • 2 قطعه
    جایگزین
  • 1 قطعه
    جایگزین
  • جایگزین
  • جایگزین

ابزارهای لازم

10
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • 2 vendors sell this, none ship to you yet
    جایگزین
  • جایگزین
  • جایگزین

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...