هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Ice-Drawer Butter Worker: An Ice Box Under the Tray, a Worker With Acute Edges
Smith kept the butter cold while it was worked, with ice in a drawer under the tray.
Lettie A. Smith of Pineville, Bucks County, Pennsylvania, received US 9,959, dated 23 August 1853, for the "Labor-Saving Butter-Worker": a tray hinged at its back on a frame, its front resting on a sliding carriage of two notched posts so it can stand flat or inclined; a cooling drawer under it "into which ice is placed for keeping the butter in a cool and nice state while being worked"; a working lever with one end playing in a circular opening in the frame, "formed with acute angles at the sides of its working face" to break or press the butter and turn it over; a spout for the water; and a hook for steelyards to weigh the butter.
This rung works out the tray's slopes, then prints the worker, its socket, the notched posts and spout, builds the frame, and works butter.
متوسط
About 4 hours, plus printing
دستورالعمل‌ها
1
1
The tray's slope
The tray's slope
در حال بارگذاری دفترچهٔ Jupyter…
2
2
Working butter before it
Working butter before it
The embedded blueprint works the butter inside the churn, drawing it past fixed posts. Smith takes it out to a tray kept cold by an ice drawer, and works it by hand.
3
3
Read US 9,959
Read US 9,959
"The butter after being taken from the churn is placed in the tray or pan E, and there washed and worked up together in the usual manner by the worker H, until all the impurities are extracted and all the water expressed from the same; the water and all extraneous matter runs down the inclined bottom of the pan and escapes through the spout."
4
4
Print the parts
Print the parts
Print the worker head with its triangular working bar, ball end and handle socket (/uploads/blueprints/ice-drawer-butter-worker-worker.stl), the ball plate with its round opening (/uploads/blueprints/ice-drawer-butter-worker-ball-plate.stl), two notched posts with their projections (/uploads/blueprints/ice-drawer-butter-worker-notched-post.stl) and the spout (/uploads/blueprints/ice-drawer-butter-worker-spout.stl). Print the worker on its flat working face. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
مواد مورد نیاز این مرحله:
فیلامنت PETG1 قطعهابزارهای مورد نیاز:
چاپگر سه‌بعدی رشته‌ای (FDM)5
5
Frame, tray and ice drawer
Frame, tray and ice drawer
Build a pine frame about 320 by 220 mm and 260 mm high, with a cross bar across its front and runners below the top. Use a shallow rectangular food-grade container as the tray; hinge its back end to the frame, drill a 16 mm hole at that low end and seal the spout in it with food-safe silicone. Slide a roasting pan onto the runners under the tray as the ice drawer.
مواد مورد نیاز این مرحله:
تختهٔ کاج1 قطعه
ظرف انبارش درجهٔ خوراکی1 قطعه
لولای در1 قطعه
چسب درزگیر سیلیکون1 قطعه
سینی کباب فر1 قطعه
پیچ چوب #8 در ۱ اینچ1 قطعهابزارهای مورد نیاز:
ارهٔ دستی
دریل شارژی
مجموعه مته
مجموعهٔ اره‌مقار
مجموعه پیچ‌گوشتی6
6
Posts, springs and worker
Posts, springs and worker
Hang the two notched posts on the front cross bar so the tray's front rests on their projections, and screw a strip of spring steel to the frame against each post to keep it in its notch. Screw the ball plate to the back of the frame above the tray's hinge, snap the worker's ball into it, and glue a 20 mm dowel into its socket as the handle, long enough to reach over the tray's front.
مواد مورد نیاز این مرحله:
نوار فولاد فنر1 قطعه
میخ‌های چوب سخت1 قطعه
چسب چوب1 قطعهپیچ چوب #8 در ۱ اینچ1 قطعهابزارهای مورد نیاز:
ارهٔ آهنبرمجموعه پیچ‌گوشتی
کاغذ سنباده7
7
The patent drawing
The patent drawing
US 9,959 drawing sheet, public domain (expired patent).
8
8
Churn, then work the butter cold
Churn, then work the butter cold
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Churn 1 litre in any churn until the butter comes, and drain it. Fill the drawer with ice. Set the tray flat, put in the butter and cold water and press and turn it with the worker's edges; raise the tray's front a notch or two so the water runs out of the spout. Repeat with fresh water until it runs clear, work in a pinch of salt and weigh the butter.
مواد مورد نیاز این مرحله:
خامه پرچرب1000 میلی‌لیتر
قالب‌های یخ1 قطعه
نمک دریای درشت1 قطعه
آب1 قطعهابزارهای مورد نیاز:
دماسنج با پروب ماندگار
کرونومتر
ترازوی دیجیتال آشپزخانه
کاسهٔ بزرگ مخلوط‌کردن فولاد زنگ‌نزن9
9
Posts that slip, butter that smears
Posts that slip, butter that smears
Ice-drawer butter worker troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Lettie A. Smith** of Pineville, Bucks County, Pennsylvania, received US 9,959, dated 23 August 1853, for the "Labor-Saving Butter-Worker." The specification calls the tray both E and F, and E is also the cross bar the notches rest on. The claims are the cooling drawer or ice box G combined with the butter tray, and the working lever formed with acute angles at the sides of its working face; Smith did not claim the working lever with a tray in general.
**Honest limits.** A container, a roasting pan, pine and printed parts stand in for the original; we weigh on a kitchen scale, not steelyards. FDM prints hold food in their layer lines, so wash well and replace when worn. Your weights are the result.
مواد
14- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 2 قطعهجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 1000 میلیلیترجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 1 قطعهجایگزین
ابزارهای لازم
12- جایگزین
- جایگزین
- 1 vendor sell this, none ship to you yetجایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
نقشه‌های مرتبط
این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.