همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Kitchen Funnel with Air-Vent Ribs, 3D Printed in PETG
A 120 mm kitchen funnel for bottling wine, cider or juice, printed in one piece in PETG. Three small ribs along the outside of the spout hold it off the bottle neck so air can come out while the liquid goes in, so it pours without glugging. A common, open design; all sizes are ours, and we have not printed or tested it yet.
مبتدی
About 4 hours, mostly printing
دستورالعملها
1
1
Our funnel's numbers
Our funnel's numbers
در حال بارگذاری دفترچهٔ Jupyter…
2
2
Make it fit your bottles
Make it fit your bottles
Optional: change TOP_D or the spout sizes and run it in FreeCAD: OUT=. TOP_D= freecadcmd build_all.py
build_all.pypython
ابزارهای مورد نیاز:
کولیس دیجیتال ۶ اینچی3
3
Print the funnel
Print the funnel
Print it rim down on the bed, no supports; the cone and spout grow upward. PETG sold for food contact, a stainless steel nozzle (brass nozzles can contain lead), 0.2 mm layers, at least 3 walls.
مواد مورد نیاز این مرحله:
فیلامنت PETG60 گرمابزارهای مورد نیاز:
چاپگر سهبعدی رشتهای (FDM)
مجموعهٔ نازل چاپگر سهبعدی4
4
Clean it up
Clean it up
Trim any strings or blobs, especially inside the spout and between the ribs. Check the spout is clear.
ابزارهای مورد نیاز:
چاقوی کاردستی5
5
Check the fit
Check the fit
Put the spout into a bottle: the ribs should touch the neck and leave gaps between them. Pour water through and watch it run without glugging.

ابزارهای مورد نیاز:
بطریهای شیشهای با درپوش
آب6
6
Sanitise
Sanitise
Soak it in no-rinse sanitiser mixed as its label says. Do not boil it: PETG softens at about 80 °C.
ابزارهای مورد نیاز:
مادهٔ ضدعفونیکننده
آب7
7
Troubleshooting
Troubleshooting
Funnel problems and fixes.
Flow
Loading...
8
8
Honest limits
Honest limits
A common, open design, drawn by us in FreeCAD; every size is ours. The ribs were checked by slicing the model; the funnel has not been printed or poured through by us yet. Sanitise before every use and replace it when scratched.
مواد
1- 60 گرمجایگزین
ابزارهای لازم
7- جایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
- جایگزین
فایلهای طراحی
1این نقشه میسازد
نقشههای مرتبط
این نقشهها دانش مشترکی دارند — تکنیکها، مواد یا اصول
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.




