هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Longquan Celadon Bowls: Glaze of Glaze Stone, Husk-and-Lime Ash and Zijin Clay, Reduction Fired
Clay

ایجاد شده توسط

Clay

1. نوامبر 2026DK
۴
۰
۰
۰
۰

Longquan Celadon Bowls: Glaze of Glaze Stone, Husk-and-Lime Ash and Zijin Clay, Reduction Fired

Longquan celadon, made in Longquan, China, since the 10th century, is a thick jade-green glaze over a bisque-fired body. The glaze is three powders washed out of local materials: glaze stone, the ash of rice husk burnt together with limestone, and iron-rich Zijin clay. Fired in reduction between 900 and 1230 °C, the iron in the glaze turns blue-green. Result: thick-glazed, jade-green celadon bowls. Source: the video 'Longquan celadon' by Shanbai (2025), checked frame by frame against its captions. Not given: amounts, the glaze proportion, ageing times, how iron is taken out, firing times. Unknown: the clay body of the bowls; the video does not show it. Photo: Southern Song Longquan bowl, Royal Ontario Museum, by Daderot (CC0).
پیشرفته
several weeks

دستورالعمل‌ها

1

Watch: Longquan celadon from stone to bowl

The whole process in eight minutes, by Shanbai: preparing the three glaze materials, throwing and bisque firing the bowls, glazing, and the reduction firing.
2

Pound the glaze stone

Crush the glaze stone in a stone mortar with a foot-trodden pestle.

مواد مورد نیاز این مرحله:

سنگ لعابسنگ لعاب1 as required

ابزارهای مورد نیاز:

دنگ پاییدنگ پایی
3

Sieve and settle the stone

Sieve the crushed stone and pound the coarse bits again. Stir the fine stone into water in a vat, sieve off the fine particles suspended in the water into another vat, and let them settle.

ابزارهای مورد نیاز:

مجموعهٔ الک (چشمهٔ پلکانی)مجموعهٔ الک (چشمهٔ پلکانی)
آبآب
ظرف سفالی دردارظرف سفالی دردار
ملاقهملاقه
4

Burn rice husk with limestone

In a brick-edged bed outdoors, lay rice husk and limestone in alternate layers and burn them. Turn the materials several times during the firing so the husk burns completely.

مواد مورد نیاز این مرحله:

پوسته برنجپوسته برنج1 as required
قالب سنگ آهکقالب سنگ آهک1 as required

ابزارهای مورد نیاز:

آجرآجر
بیلبیل
5

Sieve and wash the ash

Sieve the ash into a vat. Add water and ladle it through a fine sieve into a fresh vat. While this 'black glaze' settles, change the water and wash it several times.

ابزارهای مورد نیاز:

مجموعهٔ الک (چشمهٔ پلکانی)مجموعهٔ الک (چشمهٔ پلکانی)
ظرف سفالی دردارظرف سفالی دردار
آبآب
ملاقهملاقه
6

Mill and settle the Zijin clay

Grind the dry Zijin clay to powder in a stone hand mill. Mix it well with water, sieve it into a fresh vat and let the fine particles settle.

مواد مورد نیاز این مرحله:

خاک زیجینخاک زیجین1 as required

ابزارهای مورد نیاز:

آسیاب سنگی دستیآسیاب سنگی دستی
آبآب
مجموعهٔ الک (چشمهٔ پلکانی)مجموعهٔ الک (چشمهٔ پلکانی)
ظرف سفالی دردارظرف سفالی دردار
7

Dewater in bags, then age

Drain the water off each of the three vats without stirring up the settled powder. Scoop each paste into a cloth bag, lay the bags on a board and press them under a millstone. When they are dewatered to a certain degree, let them age for a while. Not given: how long. Ours: linen bags (as in the transcript).

ابزارهای مورد نیاز:

ملاقهملاقه
کیسه کتانکیسه کتان
سنگ آسیای دستیسنگ آسیای دستی
8

Throw the bowls

Throw the bowls on the wheel and let them air-dry in the shade. Unknown: the clay body; the video does not show what it is or how it is made.

مواد مورد نیاز این مرحله:

بدنه گلی ناشناختهبدنه گلی ناشناخته1 as required

ابزارهای مورد نیاز:

چرخ سفالگریچرخ سفالگری
9

Trim and stamp

Set each dry bowl upside down on a chuck on the wheel, trim the outside and the foot smooth, and stamp your mark in the foot.

ابزارهای مورد نیاز:

چرخ سفالگریچرخ سفالگری
ابزارهای تراش چوب ترابزارهای تراش چوب تر
مهر سفالگرمهر سفالگر
10

Bisque fire at about 800 °C

Stack the bowls in the kiln, brick up the door and seal it with mud, and fire with wood to about 800 °C. The bisque firing makes the body stronger and more absorbent, so the glaze takes better.

ابزارهای مورد نیاز:

کورهکوره
آجرآجر
هیزمهیزم
پیرومترپیرومتر
11

Make the glaze

Mix the burnt husk-and-lime ash, the glaze stone and the Zijin clay in proportion, add about an equal amount of water, stir and grind fine. Sieve it, take out the iron, and let the glaze age in the glaze vat. Not given: the proportion, how the iron is removed, how long it ages. Rice husk ash, glaze stone and Zijin clay give the silica, feldspar and kaolin; Zijin clay's iron is the colourant; lime and the potash and soda of feldspar lower the melting point.

ابزارهای مورد نیاز:

هاون و دستهٔ هاون سنگیهاون و دستهٔ هاون سنگی
آبآب
مجموعهٔ الک (چشمهٔ پلکانی)مجموعهٔ الک (چشمهٔ پلکانی)
ظرف سفالی دردارظرف سفالی دردار
12

Dip the bowls

Hold each bisque bowl with wire tongs and dip it into the glaze. Let it air-dry.

ابزارهای مورد نیاز:

انبر غوطه‌وریانبر غوطه‌وری
ظرف سفالی دردارظرف سفالی دردار
13

Spray on more glaze

Set the bowl upside down on a chuck on the wheel and spray glaze evenly over the outside with a mouth-blown sprayer. Repeated bisque firings, dipping and thin spray coats build a thick glaze; Longquan celadon is a lime-alkali glaze that stays put at high temperature. Scrape the glaze off the foot with a knife.

ابزارهای مورد نیاز:

چرخ سفالگریچرخ سفالگری
لعاب‌پاش دمیدنیلعاب‌پاش دمیدنی
چاقوچاقو
14

Reduction fire in saggars

Set the bowls in saggars, stack them in the kiln and seal the door. Between 900 °C and 1230 °C, feed fuel often, and when combustion is insufficient fire in reduction: the iron in the glaze gives up oxygen, and the mix of divalent and trivalent iron turns the glaze blue-green. Not given: how long the firing takes.

ابزارهای مورد نیاز:

جعبهٔ نسوز (ساگار)جعبهٔ نسوز (ساگار)
کورهکوره
آجرآجر
هیزمهیزم
پیرومترپیرومتر

مواد

5
  • 1 as required
    جایگزین
  • 1 as required
    جایگزین
  • جایگزین
  • 1 as required
    جایگزین
  • جایگزین

ابزارهای لازم

21

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...