همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Pit-Sawing Square Timber and Battens from a Log (Moxon, 1678)
Woody

ایجاد شده توسط

Woody

14. نوامبر 2026NO
۷
۰
۰
۰
۰

Pit-Sawing Square Timber and Battens from a Log (Moxon, 1678)

How sawyers and joiners in Moxon's day ripped a log into squares, quarters and battens: lines struck with a chalked string, the log wedged over a saw-pit or on high trestles and plumbed true, and a framed pit-saw worked by a top-man and a pit-man, with wedges in the kerf to keep it open.
متوسط
A day per log (two people)

دستورالعمل‌ها

1

Setting off a scantling

در حال بارگذاری دفترچهٔ Jupyter…
2

Read Mechanick Exercises

"If they would take any Square, Quarter, or Batten, &c. off, they first set off their Scantlin."
3

Set off the size

Open the compasses to the size you want plus the saw's kerf (e.g. 70 mm + kerf for a 70 x 70 mm square) and prick that distance from one side at both ends of the log. Set off exactly the size and the piece comes out half a kerf thinner.

مواد مورد نیاز این مرحله:

کنده‌های چوب نرمکنده‌های چوب نرم1 قطعه

ابزارهای مورد نیاز:

پرگار دوسرپرگار دوسر
متر نواریمتر نواری
4

Line the stuff

Chalk a line hard, hold it on the pricks at both ends, strain it stiff, lift the middle straight up and let it snap down to leave a chalk line. Mark the underside the same way. Working alone, hook the line on a compass point or a nail at one end.

ابزارهای مورد نیاز:

ریسمان گچی خط‌کشیریسمان گچی خط‌کشی
پرگار دوسرپرگار دوسر
5

Set up over the pit

Wedge the log fast over a saw-pit, or on two strong trestles a little more than man-high with four spreading legs. Plumb the side the lines were set from so it hangs exactly upright, or the piece will be thicker at top or bottom.

ابزارهای مورد نیاز:

گوه‌های چوبیگوه‌های چوبی
شاقولشاقول
6

Saw

Enter the pit-saw at one end: the top-man on the log guides it exactly in the line and draws it a little towards him on the down stroke; the pit-man below pulls straight down with all his strength, not so far that the handles drop out of reach. On the up stroke bear the teeth off the wood. When the sawn pieces pinch the blade, drive a wedge into the kerf, as far as you dare without splitting it.

ابزارهای مورد نیاز:

ارهٔ گودالی (ارهٔ دونفره)ارهٔ گودالی (ارهٔ دونفره)
گوه‌های چوبیگوه‌های چوبی
چکش چوبیچکش چوبی
7

Square and batten

Turn the log and line and saw the other faces the same way to get squares (70 x 70 mm here) and thinner battens.

ابزارهای مورد نیاز:

ارهٔ گودالی (ارهٔ دونفره)ارهٔ گودالی (ارهٔ دونفره)
ریسمان گچی خط‌کشیریسمان گچی خط‌کشی
پرگار دوسرپرگار دوسر
8

Troubleshooting

Pit-sawing troubleshooting.

Flow

Loading...
9

History and honest limits

From Joseph Moxon, **Mechanick Exercises**, Numb. V, Joinery (1678), §27, pp. 96-98, and Plate 4 M (checked on the archive.org scan mechanickexercis00moxo). Softwood, the 70 mm size and the kerf figure are ours.

مواد

1

ابزارهای لازم

7

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...