همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Oscilloscope: Two-Channel Digital, with a Delay per Channel and a Common Delay (Anritsu, US 4,727,288, 1988)
A two-channel digital oscilloscope. Each channel has its own converter and delay circuit. One knob, with a main and a sub button, sets the delays. The sub button shifts only the sub channel's wave, so you can line it up against the main one. The main button shifts both waves together and keeps the gap between them.
Result: a 2-channel digital oscilloscope that can move both traces along the time base without losing their phase difference.
Source: K. Nakatsugawa et al. (Anritsu), US 4,727,288 (1988). Unknown: sample rate, bandwidth, memory size and the display. Picture: the patent drawing.
متخصص
Unknown
دستورالعملها
1
1
Convert the two channels
Convert the two channels
Bring the main channel and the sub channel each to its own analog-to-digital converter. Ours: BNC sockets. Not given: the sample rate, the bandwidth.
مواد مورد نیاز این مرحله:
مبدل آنالوگ به دیجیتال2 main and sub converters
مجموعهٔ اتصالهای هممحور (BNC / SO-239)1 input socketsابزارهای مورد نیاز:
هویه
سیملختکن2
2
Delay, store and display
Delay, store and display
Pass each channel's digital signal through its own delay circuit, whose delay is set by its own delay value setting device. Store both delayed signals in a wave memory and show them on the display. Ours: logic ICs for the delay circuits and setting devices, IC memory, and a CRT driven through D/A converters. Not given: how the delay circuits are built, the memory size, the display.
مواد مورد نیاز این مرحله:
مجموعهٔ آیسی منطقی1 delay circuits and setting devices
حافظه مدار مجتمع1 wave memory
مبدل دیجیتال به آنالوگ2 display drive
لامپ پرتو کاتدی1 displayابزارهای مورد نیاز:
هویه
سیملختکن3
3
Build the delay panel and processor
Build the delay panel and processor
Make a delay operation panel with a main switch, a sub switch and one dial, with an encoder on the dial so each turn is read as a change in its output. Connect the panel to a microprocessor with a common memory that holds the sub channel's delay S in one area and the main channel's delay M in another. Mount it all in a case with its supply. Ours: push buttons, an aluminium case, a DC supply.
مواد مورد نیاز این مرحله:
کلید فشاری2 main and sub switches
انکودر دوّار1 delay dial
ریزپردازنده1 command devices
حافظه مدار مجتمع1 common memory
جعبهٔ آلومینیومی1 caseابزارهای مورد نیاز:
منبع تغذیهٔ جریان مستقیم
دریل ستونی
هویه4
4
Program the two commands
Program the two commands
When the dial turns, read the encoder change e and which switch is held. Sub switch: add e to S, set the sum in the sub channel's setting device and store it back as the new S. Main switch: add e to both M and S, set M + e in the main channel's device and S + e in the sub channel's, and store both back. The main command so moves both channels by the same amount and keeps their relative delay.
ابزارهای مورد نیاز:
هویه5
5
Compare two waves
Compare two waves
Feed two signals in. Hold the sub switch and turn the dial to slide the sub channel's wave against the main one. Then hold the main switch and turn the dial: both waves move along the time base together, with the phase difference between them unchanged. Test it with a known signal.
ابزارهای مورد نیاز:
مولد تابعمواد
10- 2 main and sub convertersجایگزین
- 1 input socketsجایگزین
- 1 delay circuits and setting devicesجایگزین
- 1 common memoryجایگزین
- 2 display driveجایگزین
- 1 displayجایگزین
- جایگزین
- جایگزین
- 1 command devicesجایگزین
- 1 caseجایگزین
این نقشه میسازد
نقشههای مرتبط
این نقشهها دانش مشترکی دارند — تکنیکها، مواد یا اصول
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

