همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Oven: Insulated Electric Oven with Plug-In Grid Heaters and a Thermostat (Ogden, US 987,161, 1911)
An electric oven built to waste as little heat as possible: a double-walled, packed box with a packed door that seals like a strong-room door. Grid-shaped heating elements slide into grooves in the walls and plug into sockets at the back, and the food rests on them. A thermostat cuts the current when the set temperature is reached and switches it on again as the oven cools.
Result: an oven that bakes, roasts or dries at a set temperature with any number of heating grids.
Source: G. J. Ogden, US 987,161 (1911). Unknown: sizes, metals, packing and temperatures. Picture: the patent drawing.
پیشرفته
Unknown
دستورالعملها
1
1
Build the insulated casing and door
Build the insulated casing and door
Make the oven chamber as a double-walled casing with packing between the walls, and grooves on the inner side walls to take the heating grids. Fit a door that closes like a fire-proof vault door, also packed, so the casing seals closely. Ours: mild steel sheet. Not given: sizes, the packing.
مواد مورد نیاز این مرحله:
ورق فولاد نرم1 inner and outer walls, door
مادهٔ عایق نامعلوم1 packingابزارهای مورد نیاز:
قیچی ورقبری
دریل ستونی
ابعاد نامعلوم2
2
Make the plug-in heating grids
Make the plug-in heating grids
Make heating elements in the form of grids that slide into the grooves and on which the food can rest. Fix a porcelain plug to each, carrying spring fingers that push into a socket with matching spring fingers in the back wall. Wire the sockets so all the elements are in parallel; use as many as the temperature and amount of food need. Ours: nichrome wire. Not given: the element type.
مواد مورد نیاز این مرحله:
سیم نیکروم1 heating grids
ماده ناشناخته1 porcelain plugs and sockets
سیم فولاد فنر1 spring fingers
سیم اتصال1 circuit wiringابزارهای مورد نیاز:
هویه3
3
Fit the thermostat control
Fit the thermostat control
Put a thermostat that bends with heat inside the oven, working a contact finger that plays between two contacts a few degrees above and below the set temperature. A switch-changing device, a small rotary motor, throws the main switch off and on as the finger touches one contact or the other. Mount a setting arm with a pointer over a scale marked in degrees, and a second pointer driven by the thermostat. Add a hand switch to turn the current on or off independently, and a lamp with its own switch to light the oven. Ours: a bimetal strip, toggle switches. Not given: temperatures.
مواد مورد نیاز این مرحله:
نوار دوفلزی1 thermostat
موتور برقی1 switch-changing motor
کلید اهرمی3 main, hand and lamp switches
فلز نامعلوم1 contacts, arm, scale
ماده ناشناخته1 incandescent oven lampابزارهای مورد نیاز:
هویه
دماسنجمواد
10- 1 inner and outer walls, doorجایگزین
- 1 packingجایگزین
- 1 heating gridsجایگزین
- 1 incandescent oven lampجایگزین
- 1 spring fingersجایگزین
- جایگزین
- 1 thermostatجایگزین
- 1 switch-changing motorجایگزین
- جایگزین
- 1 contacts, arm, scaleجایگزین
این نقشه میسازد
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

