هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down
Emma

ایجاد شده توسط

Emma

6. اکتبر 2026SE
۹
۰
۰
۰
۰

Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down

O'Neil used the rush of the cream itself to draw air into it. John O'Neil of Xenia, Ohio, received US 7,531, dated 30 July 1850, for an atmospheric churn: a box divided by a movable partition with its lower edge perforated; an air tube down the partition with a bowl at its top, in the lid, holding a spring-closed hinged valve; a horizontal tube at its foot and branch tubes through the partition's lower edge, which "serve the double purpose of breaking the cream as it passes through and of communicating the current of atmosphere to the opposite apartment." Two plungers on a rocking lever, one cut to pass over the air tube, work oppositely. This rung estimates the suction, then prints the partition with its tubes, the valve bowl and the plungers, builds the box and lever, and makes butter.
پیشرفته
About 5 hours, plus printing

دستورالعمل‌ها

1

The suction

در حال بارگذاری دفترچهٔ Jupyter…
2

Two plungers forcing cream through holes before it

The embedded blueprint throws cream between three chambers. O'Neil uses two, and lets the cream's rush through branch tubes draw air down an air tube.
3

Read US 7,531

"The depression of one, and the same time the elevation of the other causes the cream to be violently rushed through the horizontal tubes d, d, and the holes in the partition from one apartment to the other alternately. The passage of the cream through the tubes d, d, causes a suction of the atmosphere down the pipe b, through the horizontal part of the tube c, to d, d, and thence to the body of cream in each apartment."
4

Print the parts

Print the partition with its air tube, foot tube and branches in one piece (/uploads/blueprints/partition-air-tube-plunger-churn-partition-and-tubes.stl), with supports. Blow through the tube's top to check air comes out of both branches. Print the valve bowl (/uploads/blueprints/partition-air-tube-plunger-churn-valve-bowl.stl), one plunger (/uploads/blueprints/partition-air-tube-plunger-churn-plunger.stl) and one notched plunger (/uploads/blueprints/partition-air-tube-plunger-churn-notched-plunger.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

مواد مورد نیاز این مرحله:

فیلامنت PETGفیلامنت PETG1 قطعه

ابزارهای مورد نیاز:

چاپگر سه‌بعدی رشته‌ای (FDM)چاپگر سه‌بعدی رشته‌ای (FDM)
5

Box, partition and valve

Take a food-safe box about 220 × 120 × 180 mm and fit two plywood strips inside the long sides at the middle as grooves, so the partition slides in and out. Drill the lid over the air tube's top and seat the bowl's spigot onto the tube through it. Hinge a small leather flap on the bowl's seat with a light spring, as his, so air passes down but cream cannot rise.

مواد مورد نیاز این مرحله:

ظرف انبارش درجهٔ خوراکیظرف انبارش درجهٔ خوراکی1 قطعه
ورق تخته‌سه‌لاورق تخته‌سه‌لا1 قطعه
نوار چرمینوار چرمی1 قطعه
چسب درزگیر سیلیکونچسب درزگیر سیلیکون1 قطعه

ابزارهای مورد نیاز:

ارهٔ موییارهٔ مویی
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
6

Plungers and lever

Glue a 12 mm hardwood dowel rod in each plunger, the notched one on the side of the air tube. Screw a pine standard to each side of the box at the middle, pass a dowel axle through them and a pine lever, and join each rod to the lever on a loose screw.

مواد مورد نیاز این مرحله:

میخ‌های چوب سختمیخ‌های چوب سخت1 قطعه
تختهٔ کاجتختهٔ کاج1 قطعه
پیچ‌های ماشینیپیچ‌های ماشینی1 قطعه
مهرهٔ شش‌گوشمهرهٔ شش‌گوش1 قطعه
چسب چوبچسب چوب1 قطعه
پیچ چوب #8 در ۱ اینچپیچ چوب #8 در ۱ اینچ1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
مجموعه پیچ‌گوشتیمجموعه پیچ‌گوشتی
7

The patent drawing

US 7,531 drawing sheet, public domain (expired patent).
مرحله 7 - Image 1
8

Rock and make butter

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Rock the lever briskly; bubbles should come from the branch tubes. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

مواد مورد نیاز این مرحله:

خامه پرچربخامه پرچرب1500 میلی‌لیتر
نمک دریای درشتنمک دریای درشت1 قطعه
آبآب1 قطعه

ابزارهای مورد نیاز:

دماسنج با پروب ماندگاردماسنج با پروب ماندگار
کرونومترکرونومتر
ترازوی دیجیتال آشپزخانهترازوی دیجیتال آشپزخانه
کاسهٔ بزرگ مخلوط‌کردن فولاد زنگ‌نزنکاسهٔ بزرگ مخلوط‌کردن فولاد زنگ‌نزن
9

No air, cream in the bowl

Partition air-tube churn troubleshooting.

Flow

Loading...
10

History and honest limits

**John O'Neil** of Xenia, Greene County, Ohio, received US 7,531, dated 30 July 1850. His plungers had parts of two sides cut away, leaving about 1½ inches at each corner, "for the purpose of gathering the butter above the dasher." He claimed the construction of the air tubes in combination with the plungers and partition. **Honest limits.** Printed parts and a food-safe box stand in for his; the notebook's pressure drop is a rough estimate. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

مواد

14

ابزارهای لازم

10

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...