هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
آینده سبز
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Weaving a Wicker Fish Trap — Funnel-Entry Basket Trap
Bob

ایجاد شده توسط

Bob

23. مارس 2026BE
19
0
0
0
0

Weaving a Wicker Fish Trap — Funnel-Entry Basket Trap

Build a funnel-entry fish trap from woven willow withies. Fish swim in through the narrow funnel opening but cannot find their way back out. This passive trap works day and night without tending.

متوسط
2-3 hours

دستورالعمل‌ها

1

Gather and Prepare Withies

Harvest green willow withies in spring or early summer when the sap is running — this is when they are most flexible. Select straight rods about 1-1.5 metres long and 3-5mm in diameter. You need 30-40 thin weavers and 8-10 thicker stakes (5-8mm) for the framework. Strip any leaves. If the withies have dried, soak them in water for several hours until pliable.

مواد مورد نیاز این مرحله:

Willow Bark StripsWillow Bark Strips30-40 rods, 1-1.5m long m
Thicker Rods (for Stakes)Thicker Rods (for Stakes)8-10 rods, 5-8mm diameter mm
CordageCordage2m m
Bait (fish scraps, berries)as needed piece

ابزارهای مورد نیاز:

DrawknifeDrawknife
2

Build the Cylindrical Body

Arrange 8 thick stakes in a circle, their butt ends together, forming a radiating star pattern. Begin weaving thin withies in and out of the stakes using a simple randing weave — over one stake, under the next, repeating around the circle. After every 3-4 rows, push the weaving down tight. The body should form a cylinder about 30cm in diameter and 50-60cm long. The weave gaps should be small enough that target fish cannot escape through the walls.

Step 2 - Image 1

مواد مورد نیاز این مرحله:

Willow Bark StripsWillow Bark Strips30-40 rods, 1-1.5m long m
Thicker Rods (for Stakes)Thicker Rods (for Stakes)8-10 rods, 5-8mm diameter mm
CordageCordage2m m
3

Form the Funnel Entrance

At the open end of the cylinder, bend the stake tips inward gradually, weaving them together to form a funnel that narrows to an opening about 5-7cm wide. The funnel should extend 15-20cm into the trap body. Fish follow the funnel walls inward easily but the narrow opening and expanding interior confuse their escape instinct — they swim along the trap walls instead of finding the small hole. Secure the funnel tip stakes by weaving their ends into the body wall.

4

Close the Back End

Weave the back end of the trap closed by bending the remaining stakes inward and interlocking them in a dome shape. Leave a small removable panel or tie-closed flap so you can retrieve fish without destroying the trap. This can be a simple bundle of withies lashed in place with cordage that you untie to harvest.

5

Set the Trap

Place bait inside the trap — fish scraps, crushed berries, or bread work as attractants. Position the trap in shallow water with the funnel entrance facing downstream. Fish moving upstream will naturally enter the funnel. Weight the trap with stones placed on top to prevent it floating away. Check the trap every 12-24 hours. In productive waters, a single trap can yield several fish per day without any active effort.

Step 5 - Image 1

مواد

4

ابزارهای لازم

1

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...