هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Reverse Osmosis: Pushing Water Uphill Through a Membrane
Mary

ایجاد شده توسط

Mary

23. سپتامبر 2026FI
۴۳
۰
۰
۰
۰

Reverse Osmosis: Pushing Water Uphill Through a Membrane

The solar still and the alembic both separate salt from water by evaporating the water — and both pay the latent heat of vaporisation to do it, about 2,400 kilojoules for every kilogram. That energy bill is why distillation stayed expensive for three thousand years. Reverse osmosis does the same separation without a phase change. Osmosis drives fresh water INTO brine through a membrane that passes water and rejects salt; push back harder than that osmotic pressure and the flow reverses, leaving the salt behind. The idea was old, but it was useless until Sidney Loeb and Srinivasa Sourirajan at UCLA made a cellulose acetate film in 1959 with a dense skin a fraction of a micrometre thick on a porous backing — thin enough to pass useful water, sound enough to hold back the salt (US 3,133,132). Every desalination plant since descends from that film.
پیشرفته
1 day

دستورالعمل‌ها

1

Understand what you are pushing against

Osmotic pressure is not friction and it is not the membrane resisting you. It is the pressure the salt solution would pull water in with, and you must exceed it before a single drop crosses the other way. For sea water at 35 grams per litre that is about 27 bar. For the brackish water most small systems treat, a few bar. This one number decides whether your build is a bicycle pump or an industrial plant, and the notebook later works it out for your own water.

مواد مورد نیاز این مرحله:

نمکنمک35 گرم

ابزارهای مورد نیاز:

ترازوی دیجیتالترازوی دیجیتال
استوانهٔ مدرجاستوانهٔ مدرج
2

Get a membrane and treat it gently

Use a small domestic RO element — the kind sold for under-sink filters. Note which way round it runs: feed in, permeate out of the centre tube, concentrate out of the far end. Two things kill a membrane quickly. Chlorine destroys polyamide film in hours, so anything chlorinated must go through carbon first — and note the irony, because the previous rung in this batch was about deliberately adding chlorine. And letting it dry out permanently collapses the pore structure: a membrane that has dried never recovers its flux.

ابزارهای مورد نیاز:

غشای اسمز معکوسغشای اسمز معکوس
3

Build the pressure side

Plumb a feed vessel to the membrane through a pump with a gauge in the line, and lead two outlets away: permeate to one jar, concentrate to another through a restrictor. You need BOTH outlets flowing. A membrane run with the concentrate closed off becomes a dead end where salt piles up against the film — concentration polarisation — and the local osmotic pressure climbs until flow stops and scale forms. Every RO system in the world throws away a stream of concentrate; that is not waste, it is what carries the rejected salt out.

مواد مورد نیاز این مرحله:

لولهٔ سیلیکونیلولهٔ سیلیکونی3 metre

ابزارهای مورد نیاز:

تلمبه ایستاده دوچرخهتلمبه ایستاده دوچرخه
فشارسنجفشارسنج
4

Make brackish water and run it

Dissolve 2 grams of salt per litre — brackish, not sea — and run it through at increasing pressure while you watch the permeate outlet. Below the osmotic pressure, nothing comes out. Cross it and permeate starts, slowly at first and then rising roughly in step with how far past it you push. Seeing that threshold with your own gauge is the whole point of building this: it is the moment an abstract equation becomes a thing you did with a pump.

مواد مورد نیاز این مرحله:

نمکنمک20 گرم
آب مقطرآب مقطر10 لیتر

ابزارهای مورد نیاز:

فشارسنجفشارسنج
استوانهٔ مدرجاستوانهٔ مدرج
کرونومترکرونومتر
5

Rejection, flux and the energy bill

در حال بارگذاری دفترچهٔ Jupyter…

ابزارهای مورد نیاز:

استوانهٔ مدرجاستوانهٔ مدرج
کرونومترکرونومتر
6

Taste, test, and notice what is missing

Compare feed, permeate and concentrate. The permeate should read near neutral and taste flat; the concentrate should be noticeably saltier than what you started with, because the salt has to go somewhere. RO strips almost everything — salts, metals, most organics, and microbes, which are enormous compared to the pores. That completeness is also the criticism: it removes the calcium and magnesium the body uses, which is why large plants remineralise afterwards rather than delivering the pure product.

ابزارهای مورد نیاز:

نوار سنجش pHنوار سنجش pH
شیشهٔ دردارشیشهٔ دردار
7

Flush it, and never let it dry

Flush with clean water at low pressure for a few minutes after every run, to wash the concentrated layer off the film before it can crystallise. For storage, keep the element wet and cool. If you will not use it for weeks, store it in the preservative solution it came in. A dried-out membrane looks identical to a working one, and behaves like a blank sheet of plastic — the most expensive way there is to learn this lesson.

مواد مورد نیاز این مرحله:

آب مقطرآب مقطر5 لیتر

ابزارهای مورد نیاز:

تلمبه ایستاده دوچرخهتلمبه ایستاده دوچرخه

مواد

3
  • 55 گرم
    جایگزین
  • جایگزین
  • 15 لیتر
    جایگزین

ابزارهای لازم

8

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...