هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Rocking Twin-Dasher Lever Churn: One Lever Rocks the Box and Works Two Dashers Through a Perforated Wall
Millie

ایجاد شده توسط

Millie

7. اکتبر 2026NL
۱۹
۰
۰
۰
۰

Rocking Twin-Dasher Lever Churn: One Lever Rocks the Box and Works Two Dashers Through a Perforated Wall

A. C. Stiles of South Bloomfield, Ohio, received US 3,764, dated 27 September 1844, for a rocking churn: an oblong box on rockers, split by a partition with holes, with a dasher on each side worked by arms on shafts across the ends, and one upright lever that rocks the box and works the dashers together. This rung prints the partition, dashers and arms, builds the box and makes butter.
پیشرفته
About 6 hours, plus printing

دستورالعمل‌ها

1

One lever, three motions

در حال بارگذاری دفترچهٔ Jupyter…
2

Two dashers from one lever, before it

Mitchell worked two dashers from one lever; Stiles adds rockers and a perforated partition between them.
3

Read US 3,764

"The machine is operated by moving the upright lever l, to and fro, which rocks the box, while at the same time it works the dashers up and down, thus throwing the cream through the partition d, till the butter is made."
4

Print the parts

Print the partition (/uploads/blueprints/rocking-twin-dasher-lever-churn-partition.stl), two dashers (/uploads/blueprints/rocking-twin-dasher-lever-churn-dasher.stl), two dasher arms (/uploads/blueprints/rocking-twin-dasher-lever-churn-dasher-arm.stl) and two lower arms (/uploads/blueprints/rocking-twin-dasher-lever-churn-lower-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

مواد مورد نیاز این مرحله:

فیلامنت PETGفیلامنت PETG1 قطعه

ابزارهای مورد نیاز:

چاپگر سه‌بعدی رشته‌ای (FDM)چاپگر سه‌بعدی رشته‌ای (FDM)
5

Box on rockers

Build a pine box about 260 × 120 × 150 mm with a close-fitting lid, sealed inside. Glue the partition across its middle and screw two curved pine rockers lengthwise underneath. Drill the lid for the two dasher handles.

مواد مورد نیاز این مرحله:

تختهٔ کاجتختهٔ کاج1 قطعه
چسب چوبچسب چوب1 قطعه
چسب درزگیر سیلیکونچسب درزگیر سیلیکون1 قطعه
پیچ چوب #8 در ۱ اینچپیچ چوب #8 در ۱ اینچ1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
ارهٔ موییارهٔ مویی
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
گیره‌هاگیره‌ها
6

Shafts, arms and lever

Set a 10 mm square shaft across each end on two studs, 60 mm above the lid. Fit a dasher arm on each, pointing inward and pinned to its dasher's handle, and a lower arm on each outside the box. Join the lower arms with a pine bar, and pivot an upright pine lever on a block near the box's foot, pinned to the bar's middle.

مواد مورد نیاز این مرحله:

میخ‌های چوب سختمیخ‌های چوب سخت1 قطعه
تختهٔ کاجتختهٔ کاج1 قطعه
میلگرد فولاد نرممیلگرد فولاد نرم1 قطعه
پیچ‌های ماشینیپیچ‌های ماشینی1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
مجموعه پیچ‌گوشتیمجموعه پیچ‌گوشتی
7

The patent drawing

US 3,764 drawing sheet, public domain (expired patent).
مرحله 7 - Image 1
8

Rock and churn

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Work the lever to and fro: the box rocks and the dashers rise and fall in turn. Keep fingers clear of the arms and the rockers. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

مواد مورد نیاز این مرحله:

خامه پرچربخامه پرچرب1500 میلی‌لیتر
نمک دریای درشتنمک دریای درشت1 قطعه
آبآب1 قطعه

ابزارهای مورد نیاز:

دماسنج با پروب ماندگاردماسنج با پروب ماندگار
کرونومترکرونومتر
ترازوی دیجیتال آشپزخانهترازوی دیجیتال آشپزخانه
کاسهٔ بزرگ مخلوط‌کردن فولاد زنگ‌نزنکاسهٔ بزرگ مخلوط‌کردن فولاد زنگ‌نزن
9

Troubleshooting

Rocking twin-dasher churn troubleshooting.

Flow

Loading...
10

History and honest limits

**A. C. Stiles** of South Bloomfield, Pickaway County, Ohio, US 3,764, 27 September 1844. He claimed the combination of the rockers and dashers in the double-chambered churn. His drawing gives no sizes; ours are ours. FDM prints hold food in their layer lines, so wash well and replace when worn.

مواد

11

ابزارهای لازم

11

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...