هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Rubber Stoppers: Pará Rubber with Ceresine, Moulded and Cured (Heil & Esch 1909)
Heil and Esch · Public domain (1909)
Emma

ایجاد شده توسط

Emma

27. اکتبر 2026SE
۴
۰
۰
۰
۰

Rubber Stoppers: Pará Rubber with Ceresine, Moulded and Cured (Heil & Esch 1909)

Laboratory rubber stoppers from a 1909 rubber factory's book of mixings: Pará rubber with ceresine wax, sulphur and magnesia, run out as a cord, cut to weight, pressed into moulds and cured. Source: Heil & Esch, The Manufacture of Rubber Goods (1909), mixing No. 34 (p. 108) and the stopper method (p. 135). They give no cure time or temperature. Using smoked ball rubber as their Pará, and the mill, clamps and steam vessel, are ours. Picture: their page of mixings.
متوسط
1 day

دستورالعمل‌ها

1

Weigh mixing No. 34

Weigh out 10,000 g Pará rubber, 2,000 g ceresine, 1,000 g sulphur and 100 g calcined magnesia (magnesia usta).

مواد مورد نیاز این مرحله:

توپ کائوچوی دودیتوپ کائوچوی دودی10000 گرم
موم سرزینموم سرزین2000 گرم
پودر گوگردپودر گوگرد1000 گرم
اکسید منیزیماکسید منیزیم100 گرم

ابزارهای مورد نیاز:

ترازوی دو کفهترازوی دو کفه
2

Mix on the rolls

Work the rubber on the mixing rolls and work the ceresine, sulphur and magnesia into it until the mixing is even.

ابزارهای مورد نیاز:

میکسر دوغلتکهٔ لاستیکمیکسر دوغلتکهٔ لاستیک
3

Run a cord on the tube machine

Run the mixing through the tube machine as a cord of a size to suit the stoppers. It must be free from air bubbles, or the stoppers will be faulty after curing.

ابزارهای مورد نیاز:

دستگاه لوله‌کشی لاستیکدستگاه لوله‌کشی لاستیک
4

Cut pieces to weight

Cut the cord into pieces of the exact weight of one stopper plus 2 or 3 per cent, for what squeezes out of the mould.

ابزارهای مورد نیاز:

چاقوی کاردستیچاقوی کاردستی
ترازوی دو کفهترازوی دو کفه
5

Press into moulds and clamp

Press each piece into a mould and clamp the small moulds very tightly in iron clips.

ابزارهای مورد نیاز:

قالب ولکانشقالب ولکانش
گیرهٔ سی‌شکلگیرهٔ سی‌شکل
6

Cure in steam

Cure the clamped moulds in a steam heater (Heil & Esch also name the sulphur bath). They give no time or temperature for stoppers; then open the moulds and take out the stoppers.

ابزارهای مورد نیاز:

اتوکلاو رومیزیاتوکلاو رومیزی
قالب ولکانشقالب ولکانش

مواد

4

ابزارهای لازم

7

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...