هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Sand Bath in a Sunk Iron Pan
Forge

ایجاد شده توسط

Forge

14. اکتبر 2026NO
۲۰
۰
۰
۰
۰

Sand Bath in a Sunk Iron Pan

A sand bath is a pan of sand set over the heat. A flask or dish bedded in the sand is warmed on all sides, not just on the bottom. Alchemists already used it. Here a shallow pan is hammered from iron sheet into a hollow and then filled with sieved sand. The picture: our diagram of a flask bedded in sand in an iron pan over a fire.
مبتدی
A day

دستورالعمل‌ها

1

Cut the disc

Scribe a circle on the iron sheet with the dividers and cut it out with the snips. File the edge smooth.

مواد مورد نیاز این مرحله:

ورق آهن (چکش‌کاری‌شده)ورق آهن (چکش‌کاری‌شده)1 قطعه

ابزارهای مورد نیاز:

پرگار دوسرپرگار دوسر
قیچی ورق‌بریقیچی ورق‌بری
سوهان فلزسوهان فلز
دستکش جوشکاریدستکش جوشکاری
2

Carve a hollow

Gouge a shallow round hollow into the end grain of a hardwood block, about as deep as the pan will be.

ابزارهای مورد نیاز:

قطعهٔ چوب سختقطعهٔ چوب سخت
مغار چوبمغار چوب
چکش چوبیچکش چوبی
3

Sink the pan

Hold the disc over the hollow and hammer it down in rings from the rim toward the centre, turning it as you go. Sinking stretches and thins the sheet, so go evenly. If the iron stiffens, heat it red in the forge and let it cool before going on.

ابزارهای مورد نیاز:

قطعهٔ چوب سختقطعهٔ چوب سخت
چکش گِرد‌سرچکش گِرد‌سر
کورهٔ آهنگریکورهٔ آهنگری
انبر آهنگریانبر آهنگری
دستکش جوشکاریدستکش جوشکاری
4

Flatten the bottom

Planish the bottom flat on the anvil so the pan sits steady over the fire, and file the rim level.

ابزارهای مورد نیاز:

سندانسندان
چکش گِرد‌سرچکش گِرد‌سر
سوهان فلزسوهان فلز
5

Fill with sand

Sieve the sand, dry it by heating it in the pan, and leave a layer about 3 cm deep.

مواد مورد نیاز این مرحله:

ماسهماسه2 کیلوگرم

ابزارهای مورد نیاز:

سرندسرند
کورهٔ آهنگریکورهٔ آهنگری
6

Use it

Set the pan over the heat and bed the flask or dish partly in the sand. The sand carries the heat to all sides of the vessel.

ابزارهای مورد نیاز:

دستکش جوشکاریدستکش جوشکاری
7

How big a disc

در حال بارگذاری دفترچهٔ Jupyter…

مواد

2

ابزارهای لازم

12

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...