همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Small Magnet: a Steel Bar Magnetised by Electric Induction (Work, 1892)
Ed

ایجاد شده توسط

Ed

7. نوامبر 2026FI
۴
۰
۰
۰
۰

Small Magnet: a Steel Bar Magnetised by Electric Induction (Work, 1892)

A permanent magnet made from a steel bar. Work (1892) names three ways to magnetise steel: single touch, double touch, and electric induction. Induction needs no magnet to start with: wind several coils of insulated copper wire over the bar and send a frequently interrupted current through them for several minutes. A Leclanché battery will do, with wire of any size from No. 20 to 30. Bar size, steel grade and the way the current is interrupted are not given. Source: Work No. 180 (27 August 1892), p. 382, answers by G. E. B. Picture: our diagram.
مبتدی
Several minutes (magnetising)

دستورالعمل‌ها

1

Read the source

"Magnetising by electric induction is effected by winding over the bar several coils of insulated copper wire, and sending a frequently interrupted current of electricity through the coil for several minutes." (Work, 27 August 1892.) For a bar magnet, the answer above it adds: "The current from your Leclanché battery will do, and the wire may be of any size from 20 to 30."
2

Wind the coil

Wind several coils of insulated copper wire, No. 20 to 30, over the steel bar. Bar size, steel grade and number of turns are not given (unknown); for small magnets the same writer prefers steel of hard temper. Ours: steel bar stock, enamelled copper wire.

مواد مورد نیاز این مرحله:

شمش میلگرد فولادیشمش میلگرد فولادی1 bar

ابزارهای مورد نیاز:

سیم مسی لاکیسیم مسی لاکی
ابعاد نامعلومابعاد نامعلوم
3

Send an interrupted current

Connect the coil to a Leclanché battery and make and break the current again and again for several minutes. How the current is interrupted is not given (unknown).

ابزارهای مورد نیاز:

باتریباتری
سیم مسی لاکیسیم مسی لاکی
4

History and honest limits

By single touch, the north end of a permanent magnet is drawn from the middle of the bar to one end a dozen times or more, and the other half is stroked the same way with the south pole; double touch uses two magnets at once from the middle outwards, which is quicker and makes a stronger magnet. Steel bars can also be magnetised by stroking them on the field-magnets of a dynamo. Not given: bar size, steel grade, number of turns, how the current is interrupted.

مواد

1

ابزارهای لازم

3

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...