همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)
A square tinplate teapot from a picnic outfit: folded from one blank, with a hinged lid, and a cock at the bottom behind a perforated strainer that holds back the leaves.
Blank 1 ft 4 1/4 in by 1 ft 0 3/8 in; lid 4 1/8 by 4 in.
Source: Paul N. Hasluck, Tinplate Work (1907), pp. 37-39. Unknown: folding order, solder, the cock. Picture: Figs. 96-97 of the book.
متوسط
Unknown
دستورالعملها
1
1
Cut the body blank
Cut the body blank
Cut a piece of tin 1 ft 4 1/4 in long by 1 ft 0 3/8 in wide and mark the pattern of Fig. 96 on it, with the hole for the cock tube. Not given: the folding order. Ours: bend it up on the dotted lines and solder the seams.
مواد مورد نیاز این مرحله:
ورق حلبی1 body
لحیم قلع-سرب1 قطعهابزارهای مورد نیاز:
سوزن خطانداز
قیچی ورقبری
میخ چوبی
چکش چوبی
هویه برقی
فلاکس لحیم2
2
Fit the cock and strainer
Fit the cock and strainer
Solder a tube about 1/2 in long into the hole for the cock (Fig. 97) and fit the cock to it. Develop the strainer (Fig. 98): top curve radius 1 13/16 in, chord corner to corner 2 15/16 in. Perforate it and solder it across the corner in front of the tube (Fig. 99).
مواد مورد نیاز این مرحله:
لوله برنجی1 1/2 in
شیر تخلیه1 قطعه
ورق حلبی1 strainer
لحیم قلع-سرب1 قطعهابزارهای مورد نیاز:
پرگار دوسر
قیچی ورقبری
سوراخکن ورق
قطعهٔ چوب سخت
هویه برقی
فلاکس لحیم3
3
Make the hinged lid
Make the hinged lid
Cut the lid (Fig. 100) 4 1/8 by 4 in; the inner rectangle 3 1/2 by 3 1/2 in leaves 1/4 in to bend up. Cut hinge projections 1/2 in wide by 5/8 in deep with equal spaces, the outer ones only 1/4 in wide. Bend them round a wire 1/16 in thick. Hasluck adds that the teapot may be enamelled dark green.
مواد مورد نیاز این مرحله:
ورق حلبی1 lid
سیم آهنی1 1/16 inابزارهای مورد نیاز:
قیچی ورقبری
میخ چوبی
چکش چوبیمواد
5- 1 lidجایگزین
- 2 قطعهجایگزین
- 1 1/2 inجایگزین
- 1 قطعهجایگزین
- 1 1/16 inجایگزین
مواد نقشههای متصل
این نقشه میسازد
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.


