هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
The Gold-Pen Protector Inkstand: A Rubber Rim for Careless Dipping
Tex

ایجاد شده توسط

Tex

30. سپتامبر 2026FO
۱۵
۰
۰
۰
۰

The Gold-Pen Protector Inkstand: A Rubber Rim for Careless Dipping

A pen thrust quickly into an inkwell strikes its point on the glass or brass edge of the mouth, and a costly diamond-pointed gold pen is spoiled. Andrew Fife of Philadelphia received US 6,664, dated 21 August 1849, for an improvement in inkstands called a "Gold-Pen Protector": "forming the top, or surface surrounding and partially covering the mouth of the reservoir of the inkstand, of gum elastic, or other similar soft elastic substance, or composition", with its hole smaller than the mouth, so that the edge of the reservoir is covered. This rung works out the force on the point with and without the rubber, then fits a rubber ring to a jar and dips two nibs, one on each, and compares them under a lens.
مبتدی
About 1 hour

دستورالعمل‌ها

1

Force on the point

در حال بارگذاری دفترچهٔ Jupyter…
2

Another well

The embedded blueprint protects the ink. Fife's rubber rim protects the pen.
3

Read US 6,664

"Among writers the habit is almost universal of thrusting the pen, quickly and carelessly, into the mouth of the reservoir for a supply of ink, and at it to throw out of the pen the superfluous ink it has taken up." "The object of the 'gold pen protector' is to interpose a soft elastic substance between the pen and the hard substances composing the inkstand and its reservoir, in such a way as to greatly decrease—if not entirely remove—the danger of breaking the point of the pen in taking a dip of ink."
4

Fit the rim and dip two nibs

Cut a ring from rubber sheet about 3 mm thick, as large as the jar's rim and with a hole a few millimetres smaller than its mouth. Glue it on with contact cement so it covers the rim's edge. Look at two new dip-pen nibs under the hand lens and note the tines. Fit one in a holder and thrust it into the rubber-rimmed jar 100 times as a writer would, knocking off the surplus on the rim. Do the same with the other nib on a bare glass jar. Look at both nibs under the lens again, then write the same line with each and compare the strokes.

مواد مورد نیاز این مرحله:

ورق لاستیکورق لاستیک1 قطعه
چسب تماسیچسب تماسی2 میلی‌لیتر
شیشهٔ دردارشیشهٔ دردار2 قطعه
مرکّب نوشتنمرکّب نوشتن50 میلی‌لیتر
مقوامقوا1 قطعه

ابزارهای مورد نیاز:

چاقوی کاردستیچاقوی کاردستی
قیچیقیچی
خط‌کشخط‌کش
ذره‌بین دستی ۱۰ برابرذره‌بین دستی ۱۰ برابر
مجموعه قلم خوش‌نویسیمجموعه قلم خوش‌نویسی
5

A rim that peels, clogs or still lets the nib strike

Gold-pen protector troubleshooting.

Flow

Loading...
6

History and honest limits

**Andrew Fife** of Philadelphia signed US 6,664 on 27 March 1849; it is dated 21 August 1849. He secured the protector with glue, cement or other material according to the inkstand, and noted that steel and quill pens as well as diamond-pointed gold ones were destroyed the same way. He disclaimed the shape of the inkstand itself. **Honest limits.** Sheet rubber and contact cement stand in for his gum elastic top, and steel dip-pen nibs for gold ones. The notebook's mass, speed and stopping distances are examples. Your lens comparisons are the result.

مواد

5
  • جایگزین
  • 2 میلی‌لیتر
    جایگزین
  • جایگزین
  • 50 میلی‌لیتر
    جایگزین
  • 1 قطعه
    جایگزین

ابزارهای لازم

5

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...