همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Veneer Hammer: an Iron Strip Set in a Wooden Head (Work, 1889)
Woody

ایجاد شده توسط

Woody

8. نوامبر 2026NO
۱۱
۰
۰
۰
۰

Veneer Hammer: an Iron Strip Set in a Wooden Head (Work, 1889)

The veneering hammer does not strike: it is drawn over glued veneer like a squeegee, pressing it down. David Adamson (1889) says it is hardly worth buying, as anyone can make one: a strip of iron 3 to 6 inches long set in a wooden head with a handle, its edge projecting, straight, and smoothly rounded. Shape and size do not matter much; it must be strong, the iron thick enough not to bend, and the edge smooth. Source: D. Adamson, 'Practical Veneering', Work, 5 October 1889, p. 453. Picture: his Fig. 1.
مبتدی
Unknown

دستورالعمل‌ها

1

Read Adamson

"A strip of iron of, say, from 3 in. to 6 in. long and of any convenient width is firmly fixed between two pieces of wood, or in a groove cut in one piece to form the head. In this a handle is inserted. The precise shape and size of any part are quite immaterial, the principal points to be observed being strength and convenience."
2

Cut the iron strip

Cut a strip of iron 3 to 6 in. long and of any convenient width, thick enough not to bend when the hammer is pressed hard. Its thickness is not given (unknown). Ours: cut from iron plate with a hacksaw.

مواد مورد نیاز این مرحله:

ورقهٔ آهنیورقهٔ آهنی1 strip 3-6 in.

ابزارهای مورد نیاز:

ارهٔ آهن‌برارهٔ آهن‌بر
ابعاد نامعلومابعاد نامعلوم
3

Make the head

Cut a groove in a block of wood and fix the strip firmly in it, with its edge projecting beyond the wood (or fix it between two pieces of wood). Fit a handle into the head. The wood, and how the strip and handle are fixed, are not given (unknown). Ours: a hardwood block, the groove sawn.

مواد مورد نیاز این مرحله:

قطعهٔ چوب سختقطعهٔ چوب سخت1 head
دستهٔ ابزاردستهٔ ابزار1 قطعه
اتصال‌دهنده نامعلوماتصال‌دهنده نامعلوم1 قطعه

ابزارهای مورد نیاز:

اره پشت‌داراره پشت‌دار
4

Round the edge

File the projecting iron edge straight, smooth and rounded so it passes freely over the veneer, and slightly round off its lower corners so they do not damage the veneer. The smoother the edge, the easier the tool is to use.

ابزارهای مورد نیاز:

سوهان (سوهان دستی)سوهان (سوهان دستی)

مواد

4

ابزارهای لازم

4

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...