هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Guitar Strings: Bronze Wound on Steel, Then Heat-Soaked (Stone and Falcone 1977)
Woody

ایجاد شده توسط

Woody

28. اکتبر 2026NO
۳
۰
۰
۰
۰

Guitar Strings: Bronze Wound on Steel, Then Heat-Soaked (Stone and Falcone 1977)

A wound string is a steel core with another wire wrapped round it. Stone and Falcone believed the wrap keeps stresses from the winding and slowly unwinds as the string is played, so the tone goes dead. Their fix: after winding, heat-soak the string, at least 2 hours at 270 °F or 30 minutes at 480 °F for a bronze wrap, then let it cool. Source: W. N. Stone and A. S. Falcone (National Musical String Co.), US 4,063,674 (1977). Unknown: the winding itself (the patent calls it conventional), where phosphor bronze wire comes from, and the gauges. These are linked to unknown heads. The plain strings of the set are steel music wire; that, the oven and the nitrogen are ours. Picture drawn by Youblob.
پیشرفته
1 day

دستورالعمل‌ها

1

Cut the core and plain strings

Cut steel music wire for the cores of the wound strings and for the plain strings of the set. Unknown: the gauges and lengths, and the ball ends.

مواد مورد نیاز این مرحله:

سیم فولادی ساز ۰٫۰۳۲ اینچسیم فولادی ساز ۰٫۰۳۲ اینچ1 as required

ابزارهای مورد نیاز:

سیم‌چینسیم‌چین
ابعاد نامعلومابعاد نامعلوم
2

Wind the bronze wrap at room temperature

Wrap phosphor bronze wire helically round each core at room temperature. The patent prefers a wrap that expands more with heat than the core. Unknown: how; the patent says only 'in a conventional manner'.

مواد مورد نیاز این مرحله:

سیم برنز فسفریسیم برنز فسفری1 as required

ابزارهای مورد نیاز:

روش پیچش نامعلومروش پیچش نامعلوم
ابعاد نامعلومابعاد نامعلوم
عینک ایمنیعینک ایمنی
3

Heat-soak the wound strings

Heat the wound strings for a bronze wrap at 270-480 °F (132-249 °C): at least 2 hours at 270 °F or at least 30 minutes at 480 °F, shorter the hotter. If the wire tarnishes in hot air, do it without air, in nitrogen or carbon dioxide. The wrap's turns settle into more even spacing.

ابزارهای مورد نیاز:

فرفر
دماسنج آزمایشگاهیدماسنج آزمایشگاهی
کپسول گاز نیتروژنکپسول گاز نیتروژن
4

Cool and set up the set

Let the strings cool back to room temperature. Make up the set with the plain steel strings.

ابزارهای مورد نیاز:

سیم‌چینسیم‌چین

مواد

2

ابزارهای لازم

7

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...