LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Activated Alumina: Aluminium Trihydrate Heated at 350 °C While Hot Air Carries the Steam Away (Derr, Alcoa, US 2,015,593)
Heating aluminium trihydrate drives out its water and leaves a porous alumina that soaks up moisture. Alcoa's Derr found it works much better when the steam is carried away at once, by a stream of hot air or by a vacuum, instead of lingering in the bed.
Result: activated alumina that takes up 14 % of its weight in water from air (8 % made the old way), up to 16 % if washed first in 3 % sulphuric acid.
Source: Derr, US 2,015,593 (Alcoa, 1935). Not given: times, bed depth, air rate, amounts. Picture drawn by Youblob.
Miðlungs
1 day
Leiðbeiningar
1
1
Wash the trihydrate in 3 % sulphuric acid
Wash the trihydrate in 3 % sulphuric acid
Before heating, wash the aluminium trihydrate in water containing about 3 % by weight of sulphuric acid. Derr calls this very desirable but not essential: it raises the capacity by about 1-2 %. Ours: stir in a beaker.
Efni fyrir þetta skref:
Álhýdroxíð1 as requiredNauðsynleg verkfæri:
Þynnt brennisteinssýra
Vatn
Bikarglas úr bórsílíkati
Glerhrærusproti2
2
Lay it in beds in a chamber
Lay it in beds in a chamber
Put the material in beds or layers in a chamber that gas can be drawn through. Ours: a tube furnace.
Nauðsynleg verkfæri:
Pípuofn3
3
Draw air at 350 °C through the bed
Draw air at 350 °C through the bed
Draw air (or combustion gas) heated to about 350 °C through the bed and out of the chamber in a continuous flow, so the steam leaves at once. Temperature: 250-800 °C works, 350-400 °C is best; above 800 °C the alumina changes and loses capacity.
Nauðsynleg verkfæri:
Loftblásari
Háhitamælir4
4
Or heat it under a partial vacuum
Or heat it under a partial vacuum
Instead of hot air, close the chamber, keep a partial vacuum in it and heat above 250 °C and below 800 °C; 300-400 °C on a large scale. The steam passes quickly out of the chamber.
Nauðsynleg verkfæri:
LofttæmidælaHáhitamælir5
5
Keep it dry
Keep it dry
The product takes up about 14 % of its weight of water from air, 16 % if acid-washed. Ours: store it in an airtight container until use.
Nauðsynleg verkfæri:
Loftþétt geymsluílátEfni
1- 1 as requiredStaðgengill
Nauðsynleg verkfæri
9- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Lofttæmidæla10% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.