LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Bone-Dry Clay Vessels: Formed, Dried Slowly, Ready to Fire
A pot must be bone dry before it is fired: dried until it is porous, no longer plastic and very fragile. On the way it passes leather-hard, when shrinking stops. Dry it slowly and evenly so it does not crack, and finish the last water off gently in the kiln.
The picture: a large unfired pot, bound round with fibre while it dries, at Nwenyein, Myanmar.
Byrjandi
One to two weeks
Leiðbeiningar
1
1
Form the vessels
Form the vessels
Build the pots as in the coil pot blueprint, up to the end of shaping; do not fire them.
2
2
Dry slowly under cover
Dry slowly under cover
Stand the pots on a cloth-covered board out of sun and draught, loosely covered, so rims and bases dry at the same pace.
Nauðsynleg verkfæri:
Yfirbreiðsla úr blautum klúti
Plastdúkur
Strigavinnuflötur fyrir leirmuni3
3
Leather-hard
Leather-hard
When the clay is firm enough to handle and has stopped shrinking, it is leather-hard: trim and burnish now, and join handles with slip.
Efni fyrir þetta skref:
Leirsleipa (fljótandi leir)50 mlNauðsynleg verkfæri:
Leirverkfærasett4
4
Uncover and dry to bone-dry
Uncover and dry to bone-dry
Uncover the pots and let them dry in a warm room until they turn pale and light. A pot that still feels cool against the cheek is still damp (our test). Handle bone-dry pots gently: they break easily.
Nauðsynleg verkfæri:
Skálavog5
5
Is it dry yet?
Is it dry yet?
Hleð Jupyter-vinnubók…
6
6
Limits
Limits
Leather-hard and bone-dry are as the Wikipedia ceramics glossary defines them; the cover, the cheek test and the weighing are ours. Kilns finish the last water with a slow, low first stage (candling).
Efni
1- Staðgengill
Nauðsynleg verkfæri
5- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.